corrugated box printing machinecarton box printing machine

1, printing roller (plate roller)

(1), the outer diameter is φ292mm (including the outer diameter of the plate is φ300mm).

(2), the surface of the steel pipe is ground and hard chrome plated.

(3), do balance correction, and run smoothly.

(4) Loading and unloading the printing plate, the electric control of the foot switch is reversed.

2, printing pressure roller

(1), the outer diameter is φ124mm.

(2), the surface of the steel pipe is ground and hard chrome plated.

(3), do balance correction, and run smoothly.

(4) Manual adjustment of the printing roller gap dial, the adjustment range is 0-12mm. 3, feeding the upper and lower rollers

(1) Upper roll: Thick-walled steel pipe with outer diameter of φ71mm, equipped with four paper feed rings.

(2), lower roll: outer diameter of φ124mm thick-walled steel pipe, surface grinding, hard chrome plating.

(3), the paper feed roller clearance dial is manually adjusted, the adjustment range is 0-12mm. 4, steel anilox roller (optional Dalian or Haili)