automatic high speed printer slotter diecutter stacker& vibration machinery

ü Gluing part: The non-stop method or the gluing system of the gluing part is used to avoid easy adjustment of the glue curing rubber wheel gap. The dial is suitable for paperboard with a thickness of between 1 and 9 mm. The amount of glue applied is easy to adjust.

ü In order to improve the speed of the belt speed bridge and flexographic printing slot production speed adjustment. At the same time, the folding belt, the conveyor belt produces a flexographic printing slotting speed almost the same, to avoid the folder and the water-based printing slotted parts are not synchronized, which may cause the cardboard to jam and achieve accurate delivery.

ü The upper and lower belt speeds can be adjusted separately, ie their speeds are different and can be adjusted to the same speed.

ü The folding cardboard adopts a belt or rubber roller to facilitate the adjustment of the folding angle.

ü The paper feed section uses spring pressure to adjust the gap, and the thickness of the cardboard is automatically adjusted between 1 and 9 mm.

ü Cardboard stacking and counting pieces.

ü The stack of cardboard is mechanically and sensorized for full automation.

ü The counter (sensor) counts the number of cartons for easy setup and reliability.

ü The stack of cardboard uses computer counting and precise pushing.

automatic high speed printer slotter diecutter stacker& vibration machinery