Portable Sea Water Desalination Equipment/Water Treatment Plant with Ro System

1.Reverse osmosis membrane:

At present, the roll-type reverse osmosis membrane is the most important component of reverse osmosis. The membrane element is similar to a

long envelope-like membrane pocket, and one side of the opening is bonded to the product water center tube containing the opening, so that

the feed water flow flows from the outside of the membrane. Under the pressure of the liquid material, the light liquid material enters the

membrane pocket through the membrane and then flows into the central tube of the product liquid material, and a drainage layer and a support

layer are arranged between the membrane sheets. According to different properties of the material, the membrane sheet is It is divided into

wide channel and narrow channel. The working pressure is up to 5.0Mpa. It has strong anti-pressure and anti-pollution properties, is not easy

to block, and can run continuously for a long time. The whole process has good separation effect, simple operation and good regeneration

performance.

2. Water ro system Roll reverse osmosis system:

The reverse osmosis system can be assembled in series and in parallel by single or multiple reverse osmosis modules, and can be assembled

into large devices for various purposes. Reverse osmosis systems are generally classified into a concentrated type and a separate type

depending on the purpose of use. According to the production scale and product quality requirements, it can be divided into two types:

continuous type and intermittent type, and can be configured in different stages and sections. A complete reverse osmosis device generally

consists of three parts: pretreatment of raw liquid, reverse osmosis membrane module, pump valve, pipeline and electrical control.

More pictures :