Flat Tube Cutting Machine , Automatic Straightening Machine 12 Months Warranty
Flat Tube Cutting Machine , Automatic Straightening Machine 12 Months Warranty
1. Main Application
The flat tube cutting machine is used for straightening and cutting aluminum harmonica tubes
of parallel flow condensers.
The flat tube cutting machine is driven by a servo motor. The raw material is conveyed by a precision linear guidance rail.
Cutting of the pipes is conducted through a revolving knife or a linear knife.
The flat tube cutting machine is also equipped with a fully-automatic decoiler.
Coil inner diameter: 450-500mm; width: 300-330mm; decoiler bearing weight: 300kg;
Coil feeding method: manually place the coil on the decoiler, and screw up the coil expansion core;
Decoiler motor power: 0.75kw
The decoiling method is stable and reliable. The flat tube cutting machine has a high cutting accuracy and a
fast working speed.
It is able to cut different pipes by adjusting the distance of the straightening rolling wheels. It takes twice or
multiple charges to cut the aluminum tube when the cut-to-length is very large.
2. Technical Parameters
|
Production rate: 2.5 seconds per time (based on cut-to-length at 650mm) Tube to be straightened and cut per time: 2 tubes; Flat aluminum tube thickness: 2mm; Flat aluminum tube width: 12-32mm Cut-to-length: larger than 100mm Feeding length of the aluminum tube: 200-900mm (twice or multiple charges to cut the aluminum tube when the cut-to-length is very large) Length straightening accuracy <±0.2mm Width straightening accuracy:±0.04mm/850nn Thickness straightening accuracy:±0.02/850mm Replacement time of coils: 3min Preparation time for cutting tubes with a different width :≤15min Cutting knife replacement time:≤5mins Air source pressure: 0.6Mpa Equipment weight: 2.8T Main Machine dimension: 4500×850×1300mm Decoiler overall dimension: 1400×1300×1800mm ( 2 sets) Equipment power: 2.5KW Floor area: 14M (L)*1.5M (W) |
3. Components List
|
Decoiler -2sets Straightening device (lengthways) -2 sets necking device - 2 sets feeding device - 2 sets clamping device -2 sets cutting device -2 sets machine main body- 1set material table- 1set |
4. Accessories with Machine
|
cutter, 8 pcs; synchronization belt, 1 pc; Tool, 1 set; |
Picture of Feeding Device of Flat Tube Straightening and Cutting Machine
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.