IECEx ATEX Certified Ex Ia IIC T4 Ga Explosion Proof Natural Gas Detector With Gooseneck
IECEx ATEX Certified Ex ia IIC T4 Ga Explosion-proof Natural Gas Detector with Gooseneck
Product Overview
Designed for the gas industry, the SK Y3000-SP are multi-application instruments, satisfying all the needs of service technicians within a single unit. With different modes of operation and internal pump, the SKY3000-SP is the most versatile instrument available for working with gas.
The SKY 3000-SP series offers technicians and workers a single in strument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed.
The explosion-proof G rade of the SKY3000 series is IECx and ATEX certifiacated with Ex ia IIC T4 Ga, which is applicable to the explosive gas mixture zone 0, zone 1, and zone 2 of the factory with grad es ⅡA , ⅡB , and ⅡC and temperature group T1~ T4.
Technical Parameters
| Gas Detected: | O2,CO,H2S,CH4 is the standard gas combine, oth er combine can be specified |
| Detection principle: | Electrochemical (O2, CO, H2S), Catalytic combustion (LEL) |
| Measure Range: | CO: 0-1000ppm, H2S: 0-100ppm, O2 : 0-30%VOL, CH4: 0-10000ppm, 0-100%LEL, 0-100%VOL |
| Resolution: | Specified according to application |
| Precision: | ≤±1-5%F.S except for special gases |
| Response Time: | ≤30 seconds |
| Language: | Chinese/English/Polish(More language can be customized) |
| Automatically test and calibrate after power-on: |
Including reset, maximum valu e (MAX), minimum value (MIN), STEL, TWA value |
| Unit: | PPM, mg/m3, %LEL, % VOL |
| Display: | LCD (160 x96) ,180° rotate |
| Backlight: | Turned on automatically when alarming, the backlight time can b e manually set |
| Data record: | 100,000 readings, the storage interval is adjustable from 5 to 3600 seconds, data can be exported to P C no need software |
| Alarm: | 95dB@30cm buzzer alarm, flashing red LED alarm and vibration al arm. Alarm status indication on the screen, alarm latched; diagnostic alarm and b attery under-voltage alarm, pump failure alarm; man down alarm |
| Battery: | 3.7V rechargeable lithium battery, battery capacity 2 200mA |
| Working hours: | More than 15 hours in continuous pumping mode |
| Charger: | Travel charger with DC interface, charging time ≥ 4 hours |
| Working temperature: | -20℃~+50℃ |
| Explosion-proof grade: |
IECEx: Ex ia IIC T4 Ga ATEX : Ex ia IIC T4 Ga |
| Humidity: | 10～90%RH(no condensation) |
| Certification (EU regulations): |
2004/34/UE (ATEX) |
| Protection grade: | IP67 |
| Working Pressure: | 86～106Kpa |
| Size: | 157*84.5*59.5mm (including back clip/water trap filter) (length * width * height) |
| Weight: | 365g (including battery, belt clip and filter) |
Product Advantages
- Optional measures up to 4 gases,(O2, CH4, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
- Gas leak detection measures methane in three different distinct ranges (ppm / LEL / %Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation.
- With flexible probe for testing undrerground leaks, measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
- Rugged polycarbonate case, sealed to IP67
- One press to restore factory settings
- Large graphical display can rotate 180°
- Support backlight function the backlight time can be manually set
- Low power consumption, long stand by time
- Support firmware upgrade remotely
Product Configuration
Standard accessories:
- Gas detector 1 piece
- 12V/1A DC power adapter 1 piece USB cable 1 piece
- User manual 1 piece
- Warranty card 1 piece
- Flexible probe 1 piece
- Aluminum suitcase 1 piece
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.