LG Display LM315WR1-SSB1 Mechanical Details
Pixel Features :
Pixel Format
3840(RGB)×2160, UHD
Dot Pitch
0.06053×0.18159 mm (H×V)
Configuration
RGB Vertical Stripe
Pixel Pitch
0.18159×0.18159 mm (H×V) [139PPI]
Mechanical Size :
Display Area
697.306×392.234 mm (H×V)
Outline Dim.
-
Outline Dim.
709.11×405.48 mm (H×V)
Outline Depth
9.60/13.6 (Typ./Max.) mm
Outline Features :
Form Factor
Flat Rectangle
Orientation
Landscape type
Aspect Ratio
16:9 (H:V)
Shape Style
4-side borderless
Holes & Brackets :
Rear mounting holes (13-M3)
Other Features :
Weight
4.52/4.75g (Typ./Max.)
Surface
Antiglare (Haze 25%), Hard coating (3H)
LG Display LM315WR1-SSB1 Optical Details
Basic Information :
Brightness
350 cd/m² (Typ.)
Contrast Ratio
1300:1 (Typ.) (Transmissive)
Viewing Angle
89/89/89/89 (Typ.)(CR≥10)
Optical Mode
IPS, Normally Black, Transmissive
Viewing Direction
Symmetry
Response Time
14 (Typ.)(G to G) ms
Color Performance :
Chromaticity
Wx:0.313; Wy:0.329
Color Numbers
1.07B (8-bit + Hi-FRC)
Color Temperature
6485K
Uniformity
1.33 (Max.)(9 points)
1931 Color Gamut :
NTSC Ratio
93%
sRGB
100% coverage
Adobe RGB
84% coverage
DCI-P3
94% coverage
Rec.2020
69% coverage
Remarks
sRGB (Rec.709, BT.709), Rec.2020 (BT.2020)
LG Display LM315WR1-SSB1 Backlight Details
Back-light Features :
Lamp Type
WLED
Amount
11S4P×2CN
Life Time
30K(Min.) Hours
Replacement
-
Lamp Shape
4 strings × 2CN
Position
Edge light type (Bottom side)
Lamp Electrical :
Voltage Input
31.5±2.2V
Current Input
90/95mA (Typ./Max.)
Consumption
22.7/24.2W (Typ./Max.)
Interface Features :
Type
Connector
Position
Lamp Driver
No
Interface Detail :
Brand
Model
Pin Pitch
Pins
Amount
Configuration
JST
1.0 mm
6 pins
2 pcs
EDP-30P4L-050A
LG Display LM315WR1-SSB1 Application Details
Basic Info :
Panel Brand
Panel Model
LM315WR1-SSB1
Diagonal Size
Application
Panel Type
a-Si TFT-LCD , LCM
Model Ali
LM315WR1 (SS)(B1)
Reliability :
Operating Temp.
0 ~ 50 °C
Storage Temp.
-20 ~ 60 °C
RoHS State
Vibration Rating
-
Remarks :
4-side borderless, 94% DCI-P3
LG Display LM315WR1-SSB1 Interface Details
Signal Systerm :
eDP (4 Lanes), HBR2 (5.4G/lane)
Logic Voltage
-
Signal Electrical :
Voltage Input
10.0V (Typ.)
Current Input
0.85/1.06A (Typ./Max.)
Consumption
8.5/10.6W (Typ./Max.)
Connector Detail :
Brand
Model
Pin Pitch
Pins
Amount
Configuration
LS Mtron
0.5 mm
30 pins
1 pcs
EDP-30P4L-060A
whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 697.306(W)×392.234(H) mm, outline size of 709.11(W)×405.48(H)×13.6(D) mm, with surface treament of Antiglare (Haze 25%), Hard coating (3H), net weight of 4.52/4.75g (Typ./Max.). As a IPS, Normally Black, Transmissive LCM product, LM315WR1-SSB1 can provides 350 cd/m² display brightness 1300:1 transimissive contrast ratio, 89/89/89/89 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 14 (Typ.)(G to G) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit + Hi-FRC gray scale signal for each dot, thus presenting a palette of 1.07B colors, also with performance of color gamut 94% (DCI-P3). This product adopted 11S4P×2CN WLED as it's backlight systerm which was placed as Edge light type (Bottom side) and have a working life time of 30K hours, external backlight driver is additionally needed. LM315WR1-SSB1 utilizes eDP (4 Lanes) as it's signal inputting systerm, which connected by 30 pins Connector with power supply voltage of 10.0V (Typ.). It's typical vertical frame rate (Fv) is 60Hz. For more latest product detail of LM315WR1-SSB1 we strongly recommend that you should refer to datasheet listed on Panelook.com or contact with LG Display.
![]()
