Flange Non Contact Radar Oil Level Sensor Transmitter Range Configuration

Price Negotiable
Price: Negotiable
MOQ: 1pc
Delivery Time: 5-8 working days
Brand: Atech sensor
Product Description

Products non contact radar oil level sensor transmitter range configuration manufacturer

 

 

Radar level sensors are typically housed in a single assembly, combining the transmitter and receiver antenna in one device.

The two main types of radar level sensors in use are Air-to-Air Radar (TAR) and Guided Wave Radar (GWR).

Airborne radar level sensors are the most commonly used type because they are non-contact and easier to install. The emitted magnetic waves fan out from the sensor until they hit the surface of the liquid and are reflected back. The main disadvantage of the TAR level sensor is that the electromagnetic pulse energy is attenuated by the longer distance and the lower dielectric process medium. TAR level measurement technology can be used in aggressive chemical applications as it does not come into contact with the fluid being measured.

Guided wave radar types include a waveguide mounted in front of the sensor to focus microwave pulses and boost the reflected wave energy. This makes it possible to use GWR-type sensors with lower dielectric process media that would otherwise degrade the performance of TAR-type sensors.

Radar level sensors are mounted above the liquid level on the top of the tank, or on a platform that spans the top of the open tank.

 

How does radar level measurement work?

 

The device operates according to the FMCW method (FMCW = Frequency Modulated Continuous Wave). Electromagnetic pulses in the GHz range are sent to the medium at different frequencies between 77 and 81 GHz. Since the transmitter is constantly changing the frequency of the transmitted signal, there is a frequency difference between the transmitted and reflected signals. Subtract the frequency of the reflected signal from the frequency of the transmitted signal at that time to obtain a low-frequency signal proportional to the horizontal distance. This signal is further processed to enable fast, reliable and highly accurate level measurement

 

Speifications

 

Technical Specifications
Housing:
Steel 316L
 
Seal ring between housing and housing cover
Silicone
view Point window on housing
Polycarbonate
Ground terminal
Stainless Steel
Power:
Two-wirc
standard version
(16~36) VDC
Intrinsic safe version
(21.6~26.4) VDC
Power consumption
max.22.5mA
Ripple allowed
 
—<100Hz
Uss<1V
—(<100~<100K)Hz
Uss<10mV
Four-wire/two
intrinsic safe+explosion proof
(21.6一26.4) VDC,
-chamber
Power consumption
max.1VA,1W
Cable:
Cable entry/plug
one cable entry of M20x1.5,one blind of M20x1.5
Spring Connection terminal
Application for cables with cross section of2.5m㎡
Output:
Output signal
4~-20mA/HART
Resolution
1.6 μa
Fault signal
Constant current output:20.5mA; 22mA; 3.9mA
Integration time
0~50 seconds,adjustable
Blind spot
end of antenna
Max. measurement distance
10m
Microwave frequency
26GHz
Measurement interval
about 1 sec.(depend on parameter settings)
Adjustment time
about 1 sec.(depend on parameter settings)
Resolution on display
1mm
Accuracy
see the diagram below
Temperature for storage/transport
(-40~80)℃
Process tempcrature (probe)
(-40~250)℃
Relative humidity
<95%
Pressure
Max.4MPa
Vibration proof
mechanical vibration l0m/s3 ,(10~~150)Hz

 

Applications

 

● City water supply

● Sewage treatment

● Tank level monitoringT

● Water-saving irrigation

● Circulation fluid monitoring

 

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Atech sensor Co.,Ltd
Location No.132 Yangyang international plaza,Zhuque road, Xi'an, Shaanxi Province, P. R. China
Contact Person Jason

Request A Quote

Please check your email address.
Your message must be at least 20 characters.