200 Sqmm AAAC Conductor All Aluminum Alloy Conductors Overhead IEC 61089 AAC, AAAC, ACSR
All Aluminum Alloy Conductors Overhead AAAC Aluminum Wire(AAC, AAAC, ACSR)IEC1089 10-1
Standard:
- BS 3242
- BS EN 50182
- IEC 61089
- ASTM B 399/B 399M
- DIN 48201 PART 6
Construction
Applications
AAAC Aluminum Alloy Conductor is Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives higher resistance to corrosion than ACSR.
Product Description
These conductors are formed by several aluminium alloy wires , stranded in concentric layers.The centre wire or wires which form the core are made of alloy.Normally the compositions of these conductors are the same as the ones pertaining to the aluminium-steel conductors.In the case of alloy conductors.All the wire have the same nominal diameter.The diameter of the alloy wires can be the same or different.The basic composition of this alloy pertains to the Aluminium-Magnesium-Silicon group.Which is also known in Europe as Almelec or Aldrey.After their drawing they must undergo a thermal treatment at a temperature of approximately 170°c.
Properties:
As regards aluminium, the wires of this alloy have a double tensile strength .Its electrical conductivity is 15% lower(53% instead of 61%) and the weight is the same.By making use of these characteristics, in many cases an alloy conductor can replace the Aluminium Conductors Steel reinforced with a similar installation cost.
Main applications:
Low, medium ,high and very high voltages transmission lines.
Composition:
| Composition | Final modulus of elasticity mpa | Coefficient of linear expansion/°c |
| 19 | 60000 | 23x10 -6 |
Technical characteristics
| Conductor size | Area | No. of wires | Diameter of wire |
Overall Diameter of Condcutor |
Linear mass | Rated Tensile strength |
Max. D.C. Resistance at 20ºC |
| mm2 | mm | mm | kg/km | kN | Ω/km | ||
| 200 | 230 | 19 | 3.93 | 19.65 | 632.7 | 67.91 | 0.1439 |
Product Structure
| Code Name |
Nominal Area |
No. / Dia. of Wire | Approx. Overall Dia. |
Approx. Weight |
Calculated Breaking Load |
Max. DC Resistance at 20° C |
| mm2 | No./mm | mm | kg/km | kN | Ω/km | |
| 16 | 18.4 | 7/1.83 | 5.49 | 50.4 | 5.4 | 1.7896 |
| 25 | 28.8 | 7/2.29 | 6.87 | 78.7 | 8.5 | 1.1453 |
| 40 | 46 | 7/2.89 | 8.67 | 125.9 | 13.6 | 0.7158 |
| 63 | 72.5 | 7/3.63 | 10.89 | 198.3 | 21.4 | 0.4545 |
| 100 | 115 | 19/2.78 | 13.90 | 316.3 | 34.0 | 0.2877 |
| 125 | 144 | 19/3.10 | 15.50 | 395.4 | 42.4 | 0.2302 |
| 160 | 184 | 19/3.51 | 17.55 | 506.1 | 54.3 | 0.1798 |
| 200 | 230 | 19/3.93 | 19.65 | 632.7 | 67.9 | 0.1439 |
| 250 | 288 | 19/4.39 | 21.95 | 790.8 | 84.9 | 0.1151 |
| 315 | 363 | 37/3.53 | 24.71 | 998.9 | 107.0 | 0.0916 |
| 400 | 460 | 37/3.98 | 27.86 | 1268.4 | 135.8 | 0.0721 |
| 450 | 518 | 37/4.22 | 29.54 | 1426.9 | 152.8 | 0.0641 |
| 500 | 575 | 37/4.45 | 31.15 | 1585.5 | 169.8 | 0.0577 |
| 560 | 645 | 61/3.67 | 33.03 | 1778.4 | 190.1 | 0.0516 |
| 630 | 725 | 61/3.89 | 35.01 | 2000.7 | 213.9 | 0.0458 |
| 710 | 817 | 61/4.13 | 37.17 | 2254.8 | 241.1 | 0.0407 |
| 800 | 921 | 61/4.38 | 39.42 | 2540.6 | 271.6 | 0.0361 |
| 900 | 1036 | 91/3.81 | 41.91 | 2861.1 | 305.6 | 0.0321 |
| 1000 | 1151 | 91/4.01 | 44.11 | 3179.0 | 339.5 | 0.0289 |
| 1120 | 1289 | 91/4.25 | 46.75 | 3560.5 | 380.3 | 0.0258 |
| 1250 | 1439 | 91/4.49 | 49.39 | 3973.7 | 424.4 | 0.0231 |
Why you choose us?
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards; Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of 60,000㎡;
- Advanced test equipment and procedures, 100% inspection before factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided.
RFQ:
1. Is your company a factory or a trade company?
Factory, more than 20 years in China
2. How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~7 days. You can use your own express account or prepay us if you do not have an account.
3. What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as the main payment terms, and other payment can also be negotiated. Trade assurance on is also available.
4. What’s the delivery time?
Sample order needs 3~5 days.
Formal order depends on the quantity, usually it needs 15 working days after get your payment.
5. What is your MOQ?
Generally it is 5000m.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.