High Building VFC 400m Construction Material Lifting Hoist
High Building 400m Construction Material Lifting Hoist
Material Lifting Hoist Features
1) Galvanized mast sections and parts provide more corrosion resistance.
2) The unique Lean/ Curve mast erection and 7 types of Wall TIE can apply to variety building.
3) Design for the building up to 400m height.
4) Variety options on cage size and number, liftting speed.Load capacities up to 2000kg.
5) Low cost for maintance and parts are avaliable.
Material Lifting Hoist Configuration
There is a electrical small crane available to facilitate the assembly of the construction elevator.
There is the additional 'C' door at cage side for convenient loading/unloading.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency Drive (VFD), with low starting current and much less wear and tear, very smooth starting and stopping.
Material Lifting Hoist Technical Data
| Item & Article No. | SC200BZ, MP-B07; SC200/200BZ, MP-B08 Material Lifting Hoist |
| Payload Capacity | 2,000 KG per Cage |
| Lifting Speed | 0–46 m/min. |
| Max. Lifting Height | 250/400 m* |
| Cage Width (Internal) | 1.5 m |
| Cage Length (Internal) | 3.2 m |
| Cage Height (Internal) | 2.35 m |
| Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
| Motor Control | FC (Frequency Control) |
| Engine Power | 2x15 KW per Cage |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
| Rack module | 8 |
| * Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.