46M/Min VFC Motors and Helical Gearbox SC200/200BZ Man Material Rack And Pinion Hoists
Adjustable Speed 0–46 M/Min SC200/200BZ Rack And Pinion Hoists
Rack And Pinion Hoists Description
1. Construction Hoist have features as good quality, long life, wide applicationrange and convenient for maintenance.
2. Construction Hoist's gearing adopts imported bearing, enameled cable and oil seal.
3. Construction Hoist's electric parts adopt products from world renowned manufacturers such as Schneider, Siements and LG.
4. Construction Hoist's racks and pinion adopts special material and heat-treatment technique, which prolong the life of these parts.
Rack And Pinion Hoists Production and Materials
KANGBO implements the true modular design of rack and pinion hoists, standardization and fine finishing of lifts parts and spare parts, and assembly line production. The material elevator components are versatile and universal.
The construction material elevator structural parts are made of 16Mn and Q345 high strength steel.
The construction lift cage roof is made by a full steel plate, and the edges are totally welded, to ensure no water leakage and high strength.
Rack And Pinion Hoists Features and Advantages
* The modular and standardizing system makes the Kangbo construction elevators be flexible, efficient, safe, productive, low energy consumptive and ownership cost, making them the best choice for both construction and rental companies.
* The material hoist runs without vibration or trembling. The Construction Site Elevator starts and stops without surging or jerking.
Rack And Pinion Hoists Technical Data
| Item & Article No. | SC200BZ, MP-B07; SC200/200BZ, MP-B08 |
| Payload Capacity | 2,000 KG per Cage |
| Lifting Speed | 0–46 m/min. |
| Max. Lifting Height | 450 m |
| Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
| Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
| Motor Control | FC (Frequency Control) |
| Engine Power | 2x15 KW per Cage |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Type of Mast | Square Column 650*650 mm with Bolted Rack |
| Length Mast Section | 1.508 m |
| Rack Module | 8 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.