SC200/200 FC Motor Rack Pinion Lift For Construction Site Lifting Speed 0–60 M/Min
SC200/200 FC Motor Rack Pinion Type Lift For Construction Site Lifting Speed 0–60 M/Min
Design
It is the truly modular design, so the lift's drive devices and cages are generic and interchangeable.
Multiple choice of construction lifts cage doors or ramps is available.
The modular and standardizing system makes the construction elevators be efficient, safe, low energy consumptive and ownership cost, making them the best choice for both construction and rental companies.
Production and Materials
Design and manufacture strictly according to European standard.
The passenger and material elevator components are versatile and universal.
The construction material elevator structural parts are made of 16Mn and Q355B high strength steel.
The construction lift cage roof is made by a full steel plate, and the edges are totally welded, to ensure no water leakage and high strength.
Technical Data
| Item & Article No. | SC200(BG) KP-B09 SC200/200(BG) KP-B10 |
| Payload capacity | 2,000 kg per cage |
| Lifting speed | 0–60 m/min. |
| Max. lifting height | 450 m |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 2x23 kw per cage |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast section | square column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.