PLC Control Stud And Track Roll Forming Machine Smart Design Top Trim Roll Former
Top trim/ flashing roll former to cover the roofing panel, smart design for small rolling machine
Quick Detail:
- Thickness : 0.42mm-0.6mm
- Material : Pre-painted Coil, 345Mpa
- Input width : 136mm
- Material weight : 1.5MT
- Cutting way: by hydraulic group, no waste cut
- Cutting tolerance : ±1mm
Description/Technical Parameter details of complete line:
- 5TX1250mm hydraulic de-coiler with/without coil car
Un-powered; Load capacity= Max.1.5Ton
Coil inner–diameter=410-570mm
Linked connected type design
Coil Width= Max.300mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Pre-painted Sheets, 245-550Mpa |
| Thickness range | 0.42mm-0.6mm |
| Coil width | 136mm |
| Carriage Frame design | Wall-plate-frame-design |
| Roll forming stages | 16 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ65mm |
| Main motor power | 4Kw with reducer |
| Rolling speed of roll former | 18m/min |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment as normal design |
| Electric Voltage Standard | 380V/50Hz/3Ph or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Machine list:
- Hydraulic un-coiler with/without coil cart
- Normal speed roll former
- Hydraulic cutting device
- Run out table or automatic stacking device for quick packing
- Siemens PLC and touch screen, Schneider brand inverter
Features:
A trapezoidal roof panel roll forming machine is always adjustable for different feeding widths. You can make trapezoidal roof panels with different effective widths from different-width materials.
This panel is to cover between two roofing panel pitches.
So this panel can be done by roll former or by pressing dies or by folding machine also.
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.