76mm Height Rib Floor Deck Roll Forming Machine For Composite Metal Deck Panel
Metal floor decking roll forming machine, 76mm height rib, composite metal deck panel
Quick Detail:
- Thickness : 0.8-1.2mm or 0.8-1.5mm
- Material : Galvanized sheets, G350-550
- Coil width : 1220mm
- Effective width: 1000mm
- Material weight : 5tons, 6tons, 7tons, 8 tons, 10tons
- Coil inner diameter : 510mm+/-+30mm
- Driven way: by driven motor
- Cutting way: by hydraulic group
- Cutting tolerance : ±1mm
Application:
Steel roof deck: The steel roof decks are manufactured generally for the construction of pitched, flat, or curved roofing almost on all kinds of buildings;
Composite metal deck: The composite metal decks have embossments in the vertical ribs designed to interlock with concrete slabs, creating a reinforced concrete slab to develop a composite floor system.
Metal form deck: Metal form decks are produced and used extensively also in floor construction as a permanent steel base for poured reinforced concrete floor slabs.
Architectural deck: This kind of steel deck offers architects and engineers the ability to create amazing designing for striking and spacious interiors, as well as dramatic and high-performing exteriors.
Bridge deck: Where a bridge has main beams installed at suitable centers, steel decking may be placed across the beams without additional supports, suitable for new construction and bridge rehabilitation.
Description/Technical Parameter details of complete line:
- 5TX1250mm Hydraulic de-Coiler with/without coil car
Expansion system by hydraulic group, Pump motor: 3KW
Driven motor to run the coil, Motor: 3KW
Inverter brand: TAIWAN Delta brand
Coil Inner-diameter=510+/-30mm
Coil width = Max.1250mm
Taper wedge expand type
Load capacity = Max. 5Tons
Snubber arms on top by pneumatic or hydraulic as per order
The coil car included or exclude as per order
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | GI/Alu-Zinc sheets |
| Thickness | 0.8mm-1.2mm/1.5mm |
| Coil input width | 1220mm |
| Carriage Frame design |
Wall-plate-frame-design Wall plate thickness 18mm |
| Roll forming stations | 28 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ95mm |
| Main motor power | 15Kw×2 with reducer or higher |
| Roll forming speed | 12-15 m/min as standard design |
| Hydraulic group power | 5.5 Kw or 7.5Kw |
| Material of cutting blade | Cr12, hear treatment |
| Cutting design | After cut-off, there is waste |
| Electric Voltage Standard | 415V/50Hz/3PH or as per request |
| Major Color of Machine Painted | RAL 5015(Blue) or as requirements |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
Schneider brand low voltage electric elements
- Product Rack Un-powered, 3 units
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.