Galvanized Sheet Metal Roll Forming Machines , Standing Seam Metal Roof Machine
Seam lock roll former, galvanized sheets roll forming machine, 71 - 478
Quick Detail:
- Thickness : 0.4-0.8mm
- Material : GI/Alu-zinc/ Aluminum/PPGL
- Input width : 600mm
- Effective width: 478mm
- Material weight : 3MT
- Coil ID : 510mm
- Driven way: by 7.5Kw driven motor
- Cutting way: by 4.0Kw hydraulic cutting device
- Cutting tolerance : ±1mm
Application:
The standing seam roof panels have a concealed fixing or seaming method by turning up the edges of two adjacent panels, and then folding or interlocking them. In this way, the seaming or fixing parts are invisible, and therefore sometimes we called the panels concealed fixing panels! The machine got its name as concealed fixing standing seam roll forming machine accordingly! Also, the standing seam roof panel system has hidden fasteners, so the machine has another name joint-hidden or fastener-hidden roll forming machine.
Machine list:
- 3T*600mm hydraulic un-coiler
- Polythene film device as request
- Roll former
- Hydraulic cutting device
- Run out table
- PLC control systems
Description/Technical Parameter details of complete line:
- 3TX600mm Hydraulic Un-Coiler
Expansion system controlled by hydraulic group
Link-connect expanding system
Pump power=1.5KW
Load capacity=3 Ton
Coil Inner – diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm
- Polythene film on device before feed in
- Entry Roller & Manual Pre-shearing device (Un-powered)
Smart cut control,
To cut off the end of the final piece of sheet only
Working thickness: max. 0.8mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | PPGI/PPGL/GI/ALU-ZINC sheets |
| Thickness | 0.4mm-0.8mm |
| Coil input width | 610mm |
| Carriage Frame design | Wall-plate-frame-design with 18mm wall thickness |
| Rolling mills forming stages | 18 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 7.5Kw with reducer |
| Rolling speed of roll former | 15m/min |
| Hydraulic group power | 4.0 Kw |
| Cutting way | Hydraulic cutting with waste after cut-off |
| Electric Voltage Standard | 380V/50Hz/3PH or as requirements |
| Machine Color Painted | RAL 5015(Blue) or as requirements |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack 4 meter long, rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.