Classic Design Z Purlin Roll Forming Machine For Multi Sizes Z Purlin
Zed section roll forming machine, roll former, for classic design, multi – sizes of Z purlin
Quick Detail:
- Thickness : 1.5mm-3.0mm
- Material : Galvanized sheets
- Material weight : 5Mt
- Coil inner diameter : 508mm
- Driven way: by 18.5kw driven motor
- Cutting way: by hydraulic power pack, post punch, post cut
- Cutting tolerance : ±1mm
Application:
Compared to traditional purlins, steel purlins have so many advantages, they are light, easy to install, and recyclable for other buildings etc. Therefore, as we can see, in modern steel industrial buildings or prefab engineered buildings, people always use C purlins, Z purlins and sometime U purlins without flange stiffeners as well.
If there is no flange holes required, then the machine can adopt to post-punching, post-cutting design
Like c purlin roll forming machine, z steel purlin roll formers also is designed to produce the section channels of different sizes, but the change to make a different size z purlin is manual. Clients need to manually change the spacers installed between rolling tools, as well as the cutting dies.
Machine list:
- Hydraulic De-coiler or Manual Un-coiler rack
- Pre-leveling device
- Roll forming machine
- Hydraulic Post-punch & Post- cut device
- Run out table
- PLC control systems
Description/Technical Parameter details of complete line:
- 5TX600mm Hydraulic Un-coiler or manual de-coiler
You can adopt to :
Manual de-coiler
Hydraulic un-coiler
Hydraulic & Driven de-coiler
- Pre-Leveling Device
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
Share the same motor with the roll former
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Color steel sheet or galvanized steel sheet |
| Thickness | 1.5-3.0mm |
| Carriage Frame design | wall-plate-frame-type |
| Rolling mills forming stages | 13 stages |
| Material of forming roller | Cr12, heat treatment |
| Shafts Diameter | Φ75mm |
| Main motor power | 15Kw*2 |
| Production speed | 12m/min |
| Hydraulic group power | 11Kw |
| Material of cutting blade | Cr12, heat treatment |
| Electric Voltage Standard | 380V/50Hz/3PH or as request |
| Major Color of Machine Painted | RAL 5015(Blue) or as request |
- PLC Control System
Control the quantity & cutting length automatically
Combined with: Siemens brand PLC and Touch Screen
Schneider brand Inverter, Omron encoder, etc
Cut-to-length tolerance≤±1mm
Control voltage 24V
- Product Rack 4 meter long ,rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.