Heavy Gauge Steel Frame Roll Forming Machine 5mm Thickness With Gearbox
Heavy gauge steel framing truss machine, 5mm thick, with gear box in every stage
Quick Detail:
- Thickness : 3.0-5.0mm
- Material : GI sheets, 245Mpa
- Material weight : 5Mt
- Coil inner diameter : 510mm
- Driven way: by 38kw driven motor
- Cutting way: by stop to cut design
- Cutting tolerance : ±1mm
Application:
This is auto exchange heavy gauge Cee purlin machine
The sketch as below machine list
The design is heavy stronger gauge design, the carriage frame is stronger than normal and the gear box is necessary for every stages
It is also should adopt to pre cut design, cut to length control
There is no post cutting device
Machine list:
- 8Mt hydraulic un-coiler with coil car
- Pre-leveling device
- Hydraulic pre-punching, pre-cutting device
- Auto exchange Cee purlin machine from C150-C300
- Gear box on every stages to make the machine work stable
- Run out rolled rack
- PLC control systems
Description/Technical Parameter details of complete line:
- 8TX600mm Hydraulic & Driven de-coiler
Load capacity= MAX.5Ton
Hydraulic system to expand coil inner hole, Pump motor: 3KW
Coil inner–diameter=510+/-30mm
Coil Width= MAX.600mm
Driven motor to push the sheets
Hydraulic top arm to hold the sheets
- Pre-Leveling Device
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
Share the same motor with the roll former
- Hydraulic Pre-punching/Pre-cutting device
Hydraulic group: 18.5Kw
Stop to pre-cut, cut to length control
To punch below holes
Single slotted or round holes on web
Double slotted or round holes on web
Single slotted or round holes on flange each side
- Roll forming machine details as below table :
| Suitable roll forming material | galvanized steel sheet |
| Thickness | 3.0-5.0mm |
| Carriage Frame design | Heavy gauge stand-frame-design |
| Roll forming stages | 15 stages |
| Roller material | Cr12Mov, heat treatment |
| Shafts Diameter | Φ95mm |
| Main motor power | 38Kw |
| Production speed | 12m/min |
| Electric Voltage Standard | 380V/50Hz/3PH or as request |
| Major Color of Machine Painted | RAL 5015(Blue) or as request |
- PLC Control System
Control the quantity & cutting length automatically
Combined with: Siemens brand PLC and Touch Screen
Schneider brand Inverter, Omron encoder, etc
Cut-to-length tolerance≤±1mm
Control voltage 24V
- Product Rack 4 meter long ,rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.