Blue Upright Roll Forming Machine / Boxbeam Panel Forming Machine For Shelves System
Boxbeam panel forming machine, cold rolled, galvanized steel
Quick Detail:
- Thickness : 1.5mm-2.0mm
- Material : Galvanized sheets
- Material weight : 5Mt
- Coil inner diameter : 510mm
- Driven way: by 11kw driven motor
- Cutting way: by hydraulic power pack
- Cutting tolerance : ±1mm
Application:
The box beam as main part together with upright, Uni, L slot and box panel is the complete shelves systems
The difference between C and beam is that the beam is two C section joint together
So, there are two parts for the roll former, one is to form 95% shape C section and 3 stages of roll former to joint them together to make the box beam
Machine list:
- Hydraulic De-coiler or Manual Un-coiler rack
- Pre-leveling device
- Roll forming machine 1
- Hydraulic Post- cut device
- Run out table
- PLC control systems
- Roll forming machine 2 to joint the C section
Description/Technical Parameter details of complete line:
- 5TX600mm Hydraulic Un-coiler or manual de-coiler
Un-powered; Load capacity= MAX.5Ton
Hydraulic system to expand coil inner hole, Pump motor: 3KW
Coil inner–diameter=510+/-30mm
Coil Width= MAX.600mm
Mandrel rotation: Draft type
- Pre-Leveling Device
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
Share the same motor with the roll former
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Color steel sheet or galvanized steel sheet |
| Thickness | 1.5-2.0mm |
| Carriage Frame design | wall-plate-frame-type |
| Rolling mills forming stages | 15 stages |
| Roller material | GCr15, heat treatment, hard chrome coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 11Kw |
| Production speed | 12m/min |
| Hydraulic group power | 5.5Kw |
| Material of cutting blade | Cr12, heat treatment |
| Electric Voltage Standard | 380V/50Hz/3PH or as request |
| Major Color of Machine Painted | RAL 5015(Blue) or as request |
- PLC Control System
Control the quantity & cutting length automatically
Combined with: Siemens brand PLC and Touch Screen
Schneider brand Inverter, Omron encoder, etc
Cut-to-length tolerance≤±1mm
Control voltage 24V
- Product Rack 4 meter long ,rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.