Easy Operate Metal Roof Ridge Cap Roll Forming Machine / Roof Tile Roll Forming Machine
Roofing ridge cap forming machine, ridge cap tile roll forming machine, metal ridge cap panel
Brief Introduction:
There are different roof flashing roll forming machines based on different technical requirements on the final products, however, in the market people most of time use three kinds of roof ridge cap roll forming machines. Roof ridge caps with pressed STEPs, Roof ridge cap without steps, and V shaped roof flashing without STEPs. It has to be pointed out that a roof ridge caps without STEPS sometimes can be used both as roof ridge caps and as roof valley flashings. In addition, there is a similar machine, Glazed Tile Roll Forming Machine.
There are not so many differences between these two kinds of roof ridge cap roll forming machines, except for different roller stations, different rolling tools, and what really makes different is hydraulic Pressing equipment which makes continuous STEPs on roof ridge caps.
Quick Detail:
- Thickness : 0.4-0.6mm
- Material : pre-painted steel
- Input width :457mm
- Material weight : 3Tons
- Coil inner diameter : 480mm
- Driven way: by driven motor
- Cutting way: no waste cut, stop to press, stop to cut
- Cutting tolerance : ±1mm
Machine list:
- 3T*600mm hydraulic & driven un-coiler
- Roll former
- Hydraulic cutting device
- Run out rack
- PLC control system
Description/Technical Parameter details of complete line:
- 3TX600mm Hydraulic Un-Coiler
Hydraulic system for expansion coil-inner-hole with 4 palms
Link-connect expanding system
Pump power=1.5KW
Frequency Inverter to regulate turning speed: Motor: 2.2KW
Load capacity=3Ton;
Coil Inner – diameter =451-530mm
Coil outer-diameter=Max.1500mm
Coiler Width=Max.600mm
Driving motor to turn the coil
Limit switch for auto stop/start device
- Entry bench and manual pre-shearing device
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Color steel sheet |
| Thickness | 0.4mm-0.6mm |
| Strip width | 457mm |
| Carriage Frame design | Wall-plate-frame-design |
| Roll forming stations | 14 stations |
| Roller material | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 7.5Kw with reducer |
| Rolling speed of roll former | 12-15m/min |
| Hydraulic group power | 11 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 415V/50Hz/3PH or as requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as requirements |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.