30KWh Lithium Li Ion Solar System Battery Bank LiFePO4 48V 600AH Battery
30KWh Lithium Li Ion Solar System Battery Bank LiFePO4 48V 600Ah Battery
LiFePO4 Cell Advantages
Long cycle life 4500 remain above 80%, low self discharge, much safe LiFePO4, passed punching test. Excellent Temperature resilience-ambient temperatures up to 50°C will not affect the life. High Discharge Current,1C is standard, higher currents are also acceptable up to 3C continuous with negligible loss in efficiency and cell life. Lighter and smaller than lead acid battery.
Specification
| Nominal voltage | 48V |
| Nominal capacity | 600Ah |
| Charge cut-off voltage | 58.4V |
| Discharge-cut off voltage | 43.2V |
| Standard charge current | 200Ah |
| Fast charge current | 600Ah |
| Continuous discharge current | 150A -500A (customized) |
| Peak discharge current | 300A (10 Sec max ) |
| Cycle life | 3000 cycles |
| Cell connect | 16S2P |
| Dimension | 670*400*900mm |
| Weight | 350kgs |
| Charge temperature range | 0-45C |
| Discharge temperature range | -20-60C |
| Charge method | CC/CV |
| CAN or RS485 port | Yes, if you need |
Charging and Discharging Curves
Quality Control
We do below test before delivering
- Capacity test
- High current discharge test
- Low temperature test
- Short circuit test
- Over charging test
- Over discharging test
- Cycle performance test
- Crush test
- Impact test
- Vibration test
- High temperature test
Packaging
Workshop
After-sale Service
For the warranty and after-service we will follow the following principle.
Warranty year(s) for this model of battery pack is specified by supplier. In the period of warranty, there is any
problem as the following description, we will take responsible for the replacement and repair.
• The whole battery pack can not be charged or discharged.
• Under the standard condition for testing, capacity is not same as nominal Ah. It is less than 80% in the first
year, or 70% in last warranty year (if the last warranty year is provided as warranty period).
• There is liquid leakage.
• There is some damage on battery pack’s case and accessory because it is caused by the battery.
There is any situation like the following description, we will not take responsible for the warranty and after-sale
service.
Expired warranty period.
• Customer didn’t follow the manual instruction, which is resulted in battery damage.
• Customer dismantles and convert the battery pack, which is not guided by the professional people.
• There is some apparent scratches and trace on the case of BMS.
• Customer has right to choose the charger, while customer should get confirmation from supplier about
technical details of Charger, to avoid misoperation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


