Battery Management System

Battery Protection Circuit Module BMS / PCM For 12V Lithium Ion Battery Pack Specification 1. Series number of battery pack 16 series 2. Cut-off voltage in charge. (Cell level) 3.9 V ±50 mV 3. Delay time of cut-off in charge state. 1.5 seconds 4. Release volt in charge state. (Cell level) 3.8 V ±50 mV 5. Cut-off volt in discharge. (Cell level) 2.0 V ±50 mV 6. Delay time of cut-off in discharge state. 1.5 seconds 7. Release volt in discharge state. (Cell level) 2.3 V ±50 mV 8.

24S 25A Battery Management System For LiFePO4 Battery Pack , PCM VICT Sailing Power offers a standard PCB (Protective Circuit Board) to protect up to 24 each of your LiFePO4 battery packs in light traction applications like e-bikes or portable power. VICT Sailing Power can also supply a dedicated BMS (with touch screen, CAN BUS) for larger, more complicated, applications. Please consult us for assistance for your specific project. Specification Series number of battery pack

32S 25A Protection Circuit Board BMS for Lithium Ion Battery Pack VICT Sailing Power offers a standard PCB (Protective Circuit Board) to protect up to 32 each of your LiFePO4 battery packs in light traction applications like e-bikes or portable power. VICT Sailing Power can also supply a dedicated BMS (with touch screen, CAN BUS) for larger, more complicated, applications. Please consult us for assistance for your specific project. Specification Series number of battery pack

Battery Management System 16 Series with Touch Screen and Can Bus VICT Sailing Power offers a standard PCB (Protective Circuit Board) to protect up to 96V Li-ion battery packs in energy storage applications like electric scooters or portable power etc. VICT Sailing Power can also supply the advanced BMS (with touch screen, CAN BUS) for the larger, more complicated battery packs. Please consult us for assistance for your specific project. Specification Series number of battery

20S 100A Protection Circuit Control Board BMS PCBA PCM for E Bikes Or Portable Powers VICT Sailing Power offer standard PCB (protection circuit board) to protect our LiFePO4 battery packs in light traction applications like e-bikes or portable powers. While dedicated BMS (with touch screen, CAN BUS) are available for complicated applications. Please consult us for your specific applications. Specification Series number of battery pack 20 series Cut-off voltage in charge.

4S 200A Protection Circuit Control Board BMS PCBA PCM for LiFePO4 Battery Pack​ Parameter Test Item Min Typical Max Unit Charge voltage 14.50 14.60 14.70 V Charge current 25 35 A Discharge current 200 210 A Over current production (100A load) 500 550 600 A Single consumption current(3.65V) 5 10 uA Single balance current(3.70V 170 180 190 mA Single balanced voltage 3.660 3.680 3.700 V Single overcharge detection voltage 3.80 3.90 4.00 V Overcharge recovery voltage 3.70 3.80 3

8 Series Battery Management System , Over Current Protection Up To 600A Overview We offer standard PCB (protection circuit board) to protect our LiFePO4 battery packs in light traction applications like e-bikes or portable powers. While dedicated BMS (with touch screen, CAN BUS) are available for complicated applications. Please consult us for your specific applications. Specification Number of Series config for battery pack 8 series (can be customized, up to 24 series)

13S 21A BMS PCM Board for Lithium Polymer Battery Pack VICT Sailing Power offers a standard PCB (Protective Circuit Board) to protect up to 13 each of your LiFePO4 battery packs in light traction applications like e-bikes or portable power. VICT Sailing Power can also supply a dedicated BMS (with touch screen, CAN BUS) for larger, more complicated, applications. Please consult us for assistance for your specific project. Feature Communication protocols can be programmed

16S 150A Battery Management System Li-ion Battery Pack PCBA Specification Series number of battery pack 16 series Cut-off voltage in charge. (Cell level) 3.9 V ±50 mV Delay time of cut-off in charge state. 1.5 seconds Release volt in charge state. (Cell level) 3.8 V ±50 mV Cut-off volt in discharge. (Cell level) 2.0 V ±50 mV Delay time of cut-off in discharge state. 1.5 seconds Release volt in discharge state. (Cell level) 2.3 V ±50 mV Continuous charging current ≤ 30A (can

13S 25A Protection Circuit Control Board BMS PCBA PCM for Energy Storage​ Battery VICT Sailing Power offer standard PCB (protection circuit board) to protect our LiFePO4 battery packs in light traction applications like e-bikes or portable powers. While dedicated BMS (with touch screen, CAN BUS) are available for complicated applications. Please consult us for your specific applications. Specification Test Item Min Typical Max Unit Charge voltage 54.40 54.60 54.80 V Max