60V 60Ah Three Wheel Electric Vehicle Lithium Ion Battery
60V 60Ah Electric Three Wheel Vehicle Lithium Ion Battery , High Power
Parameter of Lithium Battery Pack
| Model No | VSNCM6060 0 |
| Nominal Voltage | 60V |
| Nominal Capacity | 60Ah |
| Energy | 1200Wh |
| Fully Charging voltage | 71.4V |
| Standard Charge Current | 12A |
| Max continous discharge current | 40A |
| Discharge Over Current Protection | 70±1A |
| Size | Customize |
| Outer case | Metal or plastic case |
| Short Circuits Protection (SCP) | Yes |
| Cycle Life | ≥1500 cycles |
| Working Temperature | Charger 0°C ~ 45°C, Discharge -20°C ~ 65°C |
Our Battery Advantages
Light weight - 1/3 weight reduction from Ni-MH, less than half the weight of VRLA
Capable of high rate discharge - 10C discharge, limited only by the BMS electronics
Fast charging - 1C charging possible
Parallel connection possible to produce the highest capacities - Battery blocks can be created in either series or parallel connected to double capacity or voltage. Cells can be series/parallel connected to give a wide range of capacities and voltages on custom packs. If this is a requirement, please discuss with our Technical team to advise of the possibilities
Excellent recoverable capacity at high discharge rates - If you discharge at 1C, you’ll recover full capacity in Ah. If you discharge VRLA at 1C, this is likely to be as low as 60% of the Ah rating
Available as a ‘drop-in’ replacement for Valve Regulated Lead Acid - Our LiFePO4 batteries are available as off-shelf solutions with the same footprints as their lower capacity VRLA counterparts
Excellent temperature range - Operates from -20°C to +60°C, lower temperature storage permissible
Low self discharge - A LiFePO4 battery is better than Ni-MH or VRLA, close to the performance of Li-Ion
Parts Detail
Advantages of our company
Small order is acceptable, 7 x 24 hours service for you, Our capabilities support delivering a very high quality batteries to our customers,
Prompt delivery reply within 12 hours, OEM or ODM is OK.
Application
FAQ
1. Can you accept OEM and ODM services?
Yes, just tell me your requirements and we will provide you with the best solution.
2. Is it OK to print my logo on battery product?
Yes. we can offer.
3. Is your lithium battery reliable?
Yes. Overcharged, over-discharged, nail penetration test, all protected by our battery
4. Do you provide samples?
Yes, we can offer
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.

