HP Compatible Fiber Optic Transceiver 10GBASE-SR SFP+ Module MMF 850nm 300m
HP Compatible Fiber Optic Transceiver 10GBASE-SR SFP+ Module MMF 850nm 300m
Description
HP Compatible 10GBASE-SR SFP+ Transceiver Module MMF 850nm 300m LC manufactured by ANC International Co., Limited is supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible. 10Gb/s SFP+ SR optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fiber Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The SFP+ SR is a "limiting module", i.e., it employs a limiting receiver. The 10G SFP+ SR optical transceiver is compliant per the RoHS Directive 2011/65/EU.
Features
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support)
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Single 3.3V power supply
Maximum link length of 400m on OM4 MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Commercial temperature range: -5°C to 70°C
Applications
10GBASE-ER at 10.3125Gbps
10GBASE-EW at 9.953Gbps
Other optical links
Optical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Units |
| Transmitter Section | |||||
| Center Wavelength | lo | 840 | 850 | 860 | nm |
| RMS Spectral Width | Dl | - | - | 0.45 | dB |
| Average Output Power | Po | -5 | - | -1 | dBm |
| Extinction Ratio | Er | 3 | - | - | dB |
| Dispersion Penalty | 3.9 | dB | |||
| Relative Intensity Noise | RIN12OMA | -128 | dB/Hz | ||
| Total jitter | Tj | IEEE 802.3ae | |||
| Receiver Section | |||||
| Center Wavelength | lo | 850 | nm | ||
| Receiver Sensitivity | Rsen | -11.5 | dBm | ||
| Stressed Sensitivity | Rsen | -10.5 | dBm | ||
| Receiver Overload | Rov | 0 | dBm | ||
| Return Loss | 12 | dB | |||
| LOS Assert | LOSA | -17 | dBm | ||
| LOS Dessert | LOSD | -15 | dBm | ||
| LOS Hysteresis | 0.5 | 4 | |||
Notes:
(Ambient Operating Temperature 0°C to +70°C, Vcc =3.3 V)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.