FlexiBend MPO Fiber Optic Cable Assemblies
12F 24F FlexiBend MTP MPO Fiber Cable Assemblies with Flexi Angle Boot
Description:
12F 24F FlexiBend MTP MPO Fiber Cable Assemblies manufactured by ANC International Co., Limited are intended for use in datacom, telecommunications, medical, and industrial equipment cabinets and rack-to-rack applications. These flexibend MTP MPO patch cords are produced with strain-relief boots that use a flexible and durable steel internal wire which allows an installer to position the boot in place. These MTP MPO patch cords are used to optimize cable routing and support low-profile installations where cabinet doors or front panels might interfere with traditional, straight-style, bend limiting boots. The flexible bend limiting boots allow cable exits in varying positions from straight to a 90-degree angle. Available in 12- and 24-fiber round cable options, the FlexiBend MTP MPO assemblies are compatible with any MPO receptacle or active QSFP, CXP and CFP modules.
Designed to be bent by hand, the round cable MPO/MTP FlexiBend boots can be positioned as needed -- 0, 45, 90 degrees -- for easier installation and maintenance of cable plant
Features:
Bendable strain-relief boots designed to secure any configuration, from straight to 90°
12- and 24-fiber round cable options
Round cable improves routing, bending and handling compared to flat-ribbon cable
Ideal for use in applications such as QSFP, CXP and CFP modules
SM (9/125 G657A1), MM (50/125 or 62.5/125), OM3, OM4, OM5 fiber optional;
MTP MPO connector endface geometry compliance to IEC standards for enhanced intermateability and interoperability
Each cable 100% tested of insertion loss, back reflection and Interferometer before shipping
Custom lengths available
Female and Male MPO MTP connectors optional
Standard Loss and Low Loss optional
Applications:
Data Center
Rack to Rack Application
LAN FTTX
Telecom
Optical Performance:
| MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
| Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
| Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
| Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
| PC≧40dB | |||||
| Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
| Exchangeability | ≤0.3dB (Connector randomly) | ||||
| Tensile Strength | ≤0.3dB (Max 66N) | ||||
| Vibration | ≤0.3dB (10~55Hz) | ||||
| Operation Temperature | -40℃ ~ +75℃ | ||||
Interferemeter Test:
| MPO/MTP | Dimension MT |
| Radius of Curvature | X≧2000mm; Y≧50mm |
| Fiber Height | 1000~4000nm |
| Endface Angle | X±0.3°; Y±0.3° |
| Core Dip | -300nm ~ 300nm |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.