Fast Fiber Ethernet Media Converter 10 100M Dual Fiber 1x SC ST FC Por To RJ45

Fast Fiber Ethernet Media Converter 10 100M Dual Fiber 1x SC STFC Por To RJ45

Description

10/100M Dual Fiber 1x SC/ST/FC Por to1x RJ45 Fast Ethernet Fiber Media Converter manufactured by ANC International Co., Limited can interconvert electrical signals of 10Base-T and 100Base-TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single-mode dual fiber, single-mode single fiber. The 10/100base dual fiber media converters are with reasonable price and especially designed for network users. 

Features

Built in a 2-port switch:
-- Pass all packets without address and CRC check (optional);
-- Supports modified cut-through frame forwarding for low latency;
-- Supports pure converter mode data forwarding for extreme low latency;
-- Supports flow control for full and halt duplex operation;
-- Bandwidth control;
-- Forward 1600 bytes packet for management;
-- Optional forward fragments.
Built in 128Kb RAM for data buffer;
Supports link fault pass through function (LFP);
Supports for end fault function (optional);
LED display for link/activity, full/half, 10/100M
Support EEPROM configuration (optional);
The longest transmission distance reach 120 kilometers;

Data rate: 10/100M
UTP port supports: MDI / MDI-X auto crossover
Optical interfaces: SC, ST or FC; single mode or multimode
Wavelength: 1310nm/1550nm
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction
Stand alone or card type can be chosen
External or internal power supply for selection by users

Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
UTP Connector: RJ-45 10/100Mbps; Fiber Connector: SC 100Mbps
UTP Cable: Cat. 5 UTP (the max distance up to 100m)
Working temperature: 0 ~ 50℃
Storage temperature: -20 ~ 70℃
Humidity: 5% ~ 90%(noncondensing)

Applications

Enterprise-wide systems
Connect VoIP phones or take fiber to the desktop
Power distant wireless access points and security cameras

Technical Parameters 

10/100M Dual Fiber 1x SC/ST/FC Por to RJ45 Fast Ethernet Fiber Media Converter

Order Information