0.22um Microelectronics Filter PVDF Membrane Microporous Pleated Filter Cartridge
PVDF Membrane Microporous Pleated Filter Cartridge Microelectronics Filter 0.22um
General Description
The PVDF Pleated filter cartridge is constructed of imported natural hydrophobic Polyvinylenedifluoride (PVDF) membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Applications:
1. High purity gas in the electronics industry;
2. Clean gas for aseptic packaging;
3. Steam filtration;
4. Oxidizing liquid and gas sterilization filtration;
5. Petroleum industry;
Features
1. Natural hydrophobic product suitable for gas filtration;
2. The modified membrane is hydrophilic and suitable for liquid filtration;
3. Wide applicability, PH range 1-13;
4. With high temperature and oxidation resistance;
5. Small differential pressure, large flow and long service life;
6. Each filter is rinsed with high purity water before leaving the factory.
Dimensions
| Outer diameter | 2.7" (69mm) |
| Length | 10", 20", 30", 40" |
Material of Construction
| Model | Membrane Pleated Filter |
| Filter Medium | PVDF |
| Support/Drainage | Polypropylene |
| Center core/Outer Cage/End Caps | Polypropylene |
| Seals Material | NBR, Silicone, EPDM, Viton |
Filter Performance
| Micron | 0.1um, 0.22um, 0.45um, 0.65um |
| Length | 10", 20" |
| Interception rate | 100%, 107CFΜ/cm² |
| Max. operating temperature | 80℃ |
| Max. operating differential pressure | 0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
| Applicable PH | 1-14 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.