DN25 Single Round Stainless Steel Filter Housing GMP Standard
Single-Round Sanitary Housings Mirror polish 304 Stainless Steel Filter Housing
General Description
P-SCF The series single-Round liquid filter housing is a small flow high-end single-round filter housing without any cleaning dead angle. Its design
fully meets the requirements of sanitary and GMP, the structure has no sanitary dead corners, and it is easy to clean; it drains thoroughly without
worrying about residual liquid.
Application
- Food & beverages
- Dyes & Intermediates
- RO Pre filtration
- Pharmaceuticals
- Bore Well water
- Processing Chemicals
- Dairy Petroleum Derivatives
- Paints & Inks
- Coolants
- Water Treatment
Features and Benefits
•Using sanitary design, no dead ends, and lowest sewage discharge design, the filter is easy to clean and no residual liquid;
• Ultra-high polishing accuracy, the inner wall can be polished 0.3μm, the outer wall can be polished 0.4μm, electrolytic polishing can be selected;
•Using new segmented clamps to enhance the sealing performance and withstand higher pressure;
•The bracket is equipped with an adjusting nut to adjust the height of the filter, which is convenient to use.
Connection
| Housing Connection | Strengthened clamp |
| In-outlet | Fast loading |
| Vent | Quick release valve |
| Drain | Quick release valve |
| Pressure Gauge | 1.5 inches clamp |
Surface Treatment
| Polish Type | Mirror polish or Electro-polished |
| Polishing Accuracy | Internal Ra: 0.3μm or External Ra: 0.4μm |
Specifications
Standard | GB, American Standard, German standard, Japanese standard, customized; single bag, parallel bag, multi-bag, cartridge |
Models | S, T series, PBF polypropylene containers etc., |
Working pressure | 0.1Mpa-1.0Mpa |
Material | 304, 316L |
Working temperature | 5-40℃ |
Filtering accuracy | 1um-800um |
Operation mode | Manual or automatic control cylinder |
High-strength support basket | by uniform pore size of high-strength stainless steel mesh manufacture of 3.5mm; |
Inlet and outlet | 1-14 inch; customized as request |
Inlet and outlet Location | Side into and side out, side into and bottom out, top into and bottom out, top into and side out; customized as request |
Interface Type | flange, screw thread or customized |
Filtration precision | 1-800um (microns) relative or absolute precision |
Seal ring material categories | general nitrile rubber, Teflon, nylon, Te Fulong acid such as high temperature and high-performance specialty materials |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.