Twin extruder compound extrusion clear plastic u channel single screw line

Material Introduction

1.  PMMA ,also called acrylic, is a kind of colorless and transparent particle.
2.  It provides good transparency, chemical stability and weathering resistance.
3.  And easy to stain ,easy processing.
4.  Besides,it has beautiful appearance.
5.  It’s widely used in the modern construction industry.
6.  PMMA is a non-toxic and environmentally-friendly material that can be used to produce tableware.
7.  PMMA is a non-toxic and environmentally-friendly material that can be used to produce tableware.

General Properties

1.  Excellent transparency with a light transmission of 93%.
2.  High gloss and colorless.
3.  Good electrical insulation from high electrostatic charges.
4.  Resistant to weathering conditions.
5.  High surface hardness.
6.  Suitable for decorating.
7.  Suitable for decorating.
8.  Good mechanical for polishing.
9.  Resistant to non-polar solvents(oils, aliphatic hydrocarbons).
10.  Suitable for use in contact with food.

Product Application

PC Plastic Hollow Cross Section Plate application

1.  Construction of sunroof in buildings ,halls, shopping center ,stadium ,public places of entertainment and public facility.
2.  Ring shield of bus stations ,garages, pergolas, corridors.
3.  Transparent shields for security forces in nursery schools airports,factories.

PP, PE Plastic Hollow Cross Section Plate application

1.  The pp hollow cross section plate is light and high strength ,moistureproof good environmental protection and refabrication performance.
2.  Can be processed into the reusable container,packing case, clapboard ,backing plate ,and culet

Details

1.  By adopting the foreign and domestic advanced technology, we successfully developed the small profile extrusion line.
2.  This line consists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing line features of good plasticization, high output capacity, low power consumption and etc.
3.  The main extruder speed controlled by imported AC inverter, and temperature control by Japanese RKC or FUJI temperature meter, vacuum pump and traction gear reducer of the downstream equipment are all good quality products, and also easy maintenance.
 

Product Display