PVC wall panel making machine plastic sheet machine corrugated sheet making machine 

 
PVC wall panel making machine plastic sheet machine Application

1. This production line adopts intelligent control and automatic operation.

2. Wallboards of various specifications, sizes, shapes and thicknesses can be produced by replacing different moulds.

3. This wallboard is a new kind of decorative material instead of wall paint and wallpaper.

4. It also has many elements such as environmental protection, heat insulation, moisture-proof, fire protection, sound insulation and fashion. The material is light and easy to install.

Extruder

1. The screw barrel is made of 38CrMoALA and nitrided by equipments from Zhejiang Zhoushan Weibo Machinery Co., Ltd. PLC Control System
2. The nitriding depth of screw is 0.4-0.6 mm, the hardness (HV) is 740-940, and the surface roughness Ra is less than 0.8 um.
3. The nitriding depth of the barrel is 0.5-0.7mm, the hardness (HV) is 940-1100, and the inner wall roughness Ra is less than 0.8um.
4. The gearbox is vertical split. The gears are treated by 20CrMoTi nitriding and grinding, the gear material of the distribution box is nitrided by 38CrMoAlA, and the shaft is made of 40Cr. The main bearings are domestic famous brand bearings, running smoothly.

Vaccum forming machine

1. The flume is made of stainless steel.
2. The whole unit length: 4M
3. Width of center track of calibrating unit : 850mm
4. Vacuum pumps: 5.5KW * 2, direct water ring vacuum pumps with Schneider overcurrent protection. (Water must be released in winter to prevent frost damage)
5. Vacuum: 0-0.09 Mpa
6. Pump Power and Quantity: 1.5KW Vertical Unit

Haul off machine

1. Number of traction belts: 2
2. Each traction is equipped with a deceleration motor. The deceleration motor: 5.5kW frequency converter provides speed control.
3. Inverter manufacturers: Zhongchen
4. Length of traction belt: 2500mm
5. Specification of traction rubber block:600.5.35
6. Effective width of traction belt: 600mm
7. Connection mode between rubber block and caterpillar: screw connection type, fastening and reliable installation

Cutting machine

1. Cutting direction of saw blade: transverse cutting
2. Cutting motor power and quantity: 2.2KW * 1 set
3. Maximum cutting size: 320.65 mm
4. Full computer control, easy to operate, reduce the failure rate.
5. Electrical Control Components: Control Components Using Schneider Contactors
6. Machine Center Height: 1000+50 mm
7. Work pressure: 0.5-0.7 Mpa
8. Can choose manual and automatic cutting mode with stainless steel shackle system

Composition of Plastic Board/Sheet/Plate Production Line

 
Product Display