Gr1 Gr2 Pure Thin Titanium Foil Rolled Annealed 0.1mm 0.13mm

High Purity Rolled Annealed Titanium Foils In Coil Gr1 Gr2 Pure Titanium Foil Titanium 0.1mm 0.13mm

Titanium is a new type of metal. The performance of titanium is related to the content of impurities such as carbon, nitrogen, hydrogen, and oxygen. The content of impurities in relatively pure titanium iodide is not more than 0.1%, but its strength is low and its plasticity is high. The properties of 99.5% industrial pure titanium are: density ρ=4.5g/cm3, melting point is 172 silicon-titanium alloy wear-resistant floor 5℃, thermal conductivity λ=15.24W/(m.K), tensile strength σb=539MPa, elongation Rate δ=25%, section shrinkage rate ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.

Titanium is a metallic chemical element and is a silver-white transition metal characterized by light weight, high strength, metallic luster, and resistance to wet chlorine corrosion.

Grade 2 "commercially pure" titanium foil, >99.6% pure, 0.005" (0.13mm) thick, available in 4 different widths. Grade 2 is widely used for light duty stoves because it combines excellent formability, moderate strength, light weight and excellent corrosion resistance. This material is used for our furnace bodies and tubes, but also for lightweight windshields, pot lids, or any other backpack tool you can think of.

Titanium is sold in 12" increments and will be shipped in uncut pieces (unless otherwise requested). Quantity 1 = 12 inches long, 2 = 24 inches long, 3 = 36 inches long, etc.

Use 10" titanium foil to make a 2.5" diameter furnace tube, 12" titanium foil to make a 3" diameter furnace tube, and 15" titanium to make a 4" diameter furnace tube.