Thick Titanium Alloy Plate Industry DIY 100x100mm 150x150mm 4.7 - 60.0mm

Thick Titanium Alloy Plate Ti Sheet Industry Or DIY 100x100mm 150x150mm Thickness 4/5/6/8/10/15/20/25/30/Mm

Pure titanium plate, GR5 titanium alloy plate (specification: 0.8mm---35mm) Thickness above 35mm can be customized

Titanium is a new type of metal. The performance of titanium and the impurity content of the purest titanium iodide do not exceed 0.1%, but it has low strength and high plasticity.

The properties of 99.5% industrial pure titanium are: density ρ=4.5g/cm3, melting point is 172 silicon-titanium alloy wear-resistant floor 5℃, thermal conductivity λ=15.24W/(m.K), tensile strength σb=539MPa, elongation Rate δ=25%, section shrinkage rate ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.

(1) High strength, can produce parts and components with high unit strength, good rigidity and light weight. At present, titanium alloys are used in aircraft engine components, skins, fasteners and landing gear.

(2) High thermal strength - the operating temperature is several hundred degrees higher than that of aluminum alloys, and the required strength can still be maintained at moderate temperatures,

(3) Good corrosion resistance - titanium alloy works in humid atmosphere and seawater medium, and its corrosion resistance is much better than that of stainless steel; its resistance to pitting corrosion, acid corrosion and stress is particularly strong; it has excellent resistance to organic materials, etc. Corrosive ability.