Industrial Polished Titanium Sheet Metal ASTM B265 400 - 1000mm Width

Titanium Plate Ti Sheet, Titanium Metal Industrial Titanium Plates In Different Sizes Are Available From Stock

Titanium is a new type of metal. The performance of titanium and the impurity content of the purest titanium iodide do not exceed 0.1%, but it has low strength and high plasticity.

Properties and chemical composition of TC4 titanium alloy

TC4 titanium alloy heat treatment: mpa, after the solid solution strengthening treatment of TC4 material, the strength does not increase much, that is, to 1100MPa, and the strength in the annealed state is generally 900MPa

Mechanical properties of TC4 titanium alloy: tensile strength σb/MPa≥895, specified residual elongation stress σr0.2/MPa≥825, elongation δ5(%)≥10, section shrinkage ψ(%)≥25

TC4 titanium alloy density: 4.51 (g/cm3) working temperature -100 ~ 550 (℃)

●Chemical composition of TC4 titanium alloy:

TC4 contains more than titanium (Ti), iron (Fe) ≤ 0.30, carbon (C) ≤ 0.10, nitrogen (N) ≤ 0.05, (H) ≤ 0.015, oxygen (O) ≤ 0.20, (Al) 5.5 ~ 6.8, vanadium (V)3.5～4.5

use:

Mainly used for stamping parts and corrosion-resistant structural parts with working temperature below 360 degrees, low stress but requiring high plasticity, such as: aircraft skeleton and skin, engine accessories, seawater corrosion-resistant pipes, valves and pumps for ships. Seawater desalination system parts, chemical heat exchangers, pumps, distillation towers, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves, and diesel engine pistons, connecting rods, Leaf Spring etc.