ASTM GR5 Titanium Block Cold Rolled 0.3-100mm Thickness

PRODUCT DESCRIPTION

ASTM-GR5 Titanium Block

Titanium Block Features:

Titanium alloys can be divided into three categories according to the composition of the phases:
Alpha alloy
,
(α+β) alloy
and
Beta alloy
, China respectively
TA, TC, TB
express.
Alpha alloy containing
A certain amount of elements of stable α phase, mainly composed of α phase in equilibrium state. Alpha alloy has a small specific gravity, good thermal strength, good weldability and excellent corrosion resistance. Alpha alloys can usually be divided into full alpha alloys (TA7), near alpha alloys (Ti-8Al-1Mo-1V) and alpha alloys (Ti-2.5Cu) with a small amount of compounds.
(α+β) alloy
Contains a certain amount of stable α-phase and β-phase elements, and the microstructure of the alloy in equilibrium is α-phase and β-phase. (α+β) alloy has medium strength and can be strengthened by heat treatment, but the welding performance is poor. (α+β) alloys are widely used, and the output of Ti-6Al-4V alloy accounts for more than half of all titanium materials.
Beta alloy
Elements containing a large amount of stable β-phase can retain all high-temperature β-phase to room temperature. Beta alloys can usually be divided into heat-treatable beta alloys (metastable beta alloys and near metastable beta alloys) and thermally stable beta alloys. Heat-treatable β-alloy has excellent plasticity in the quenched state, and the tensile strength can reach 130-140kgf/mm2 through aging treatment. Beta alloys are usually used as high-strength and high-toughness materials. The disadvantage is that the specific gravity is large, the cost is high, the welding performance is poor, and the cutting process is difficult.
Titanium is a new type of metal. The performance of titanium is related to the content of impurities such as carbon, nitrogen, hydrogen, and oxygen. The purest titanium iodide has an impurity content of no more than 0.1%, but its strength is low and its plasticity is high. The properties of 99.5% industrial pure titanium are: density ρ=4.5g/cm3, melting point 1725℃, thermal conductivity λ=15.24W/(m.K), tensile strength σb=539MPa, elongation δ=25%, section Shrinkage rate ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.
 

ASTM-GR5 Titanium Block Discription:
 

Applications:

Aviation,shipping,chemical,industrial,equipment manufacturing,medical,automobile as well sports

Competitive Advantage:

We have more than ten years of experience in building titanium’s factory,which includes almost one thousand employees.our factory located in baoji,titanium valley.we strictly control every process of production and strive to provide customers with high quality products,And our products sale to all over the world.