Corrosion Resistant High Purity GR1 GR2 Titanium Disk Precision Machining Parts

Corrosion-Resistant High-Purity GR1 GR2 Titanium Cake Precision Machining Parts

Heat Treatment:

TA2 is an industrial titanium with a single α phase.
Chinese name TA2 Iron (Fe) ≤0.30 Carbon (C) ≤0.10, Nitrogen (N) ≤0.05
Performance of TA2
Industrial pure titanium is divided into three grades of TA1, TA2 and TA3 according to the content of impurities. The interstitial impurity elements of these three kinds of industrial pure titanium gradually increase, so their mechanical strength and hardness also increase step by step, but the plasticity and toughness decrease accordingly.
The commercially pure titanium commonly used in industry is TA2, because of its moderate corrosion resistance and comprehensive mechanical properties. TA3 can be used when the requirements for wear resistance and strength are high. TA1 can be used when better formability is required.
TA1, TA2 and TA3 in the national standard correspond to Gr0, Gr1 and Gr2 in this UNS.
TA1 and TA2 have good low-temperature toughness and high low-temperature strength when the iron content ω is 0.095%, the oxygen content ω is 0.08%, the hydrogen content ω is 0.0009%, and the nitrogen content ω is 0.0062%. Low-temperature structural materials below -253°C.
TA2 Chemical Composition
TA2 contains titanium (Ti) balance, iron (Fe) ≤ 0.30, carbon (C) ≤ 0.10, nitrogen (N) ≤ 0.05, hydrogen (H) ≤ 0.015, oxygen (O) ≤ 0.25.

Description:

Competitive Advantage:

The company's business covers the world. Dinghongyuan takes advanced new materials as the leading industry. The company's main business is: 1. Titanium materials: titanium plate, titanium rod, titanium wire, titanium tube, titanium ring, titanium cake, titanium forging, titanium cube, titanium strip, titanium foil , titanium flange, titanium anode, titanium target block, titanium pipe fittings, titanium elbow, titanium tee, titanium concentric reducer, titanium standard parts, titanium processed parts, titanium special-shaped parts, etc. 2: Other non-ferrous metal materials: zirconium plate , Zirconium tubes, zirconium rods, zirconium targets, zirconium cakes, zirconium rings, zirconium crucibles, niobium plates, niobium rods, niobium tubes, tantalum plates, tantalum rods, tantalum tubes, etc. Three: Target material: titanium target, chromium target, zirconium target, nickel target, titanium aluminum target, nickel alloy target and alloy target.

Applications:

Products are widely used in vacuum salt making, fine chemicals, petrochemicals, pharmaceuticals, chlor-alkali industry, electroplating, electrolysis, aerospace,Seawater desalination and other industries.