Flat Top Titanium Nut Bolt Umbrella Head , Disc Brake Fastening Modification

PRODUCT DESCRIPTION

Titanium Alloy Flat Top Umbrella Head, Disc Brake Disc Fastening Modification

Heat Treatment

Adding aluminum, boron and other α-stabilizing elements to titanium obtains α-titanium alloy.

The room temperature strength of α titanium alloy is lower than that of β titanium alloy and (a+b) titanium alloy, but its strength at high temperature (500 ℃ ~ 600 ℃) is higher than them.
The structure is stable, the oxidation resistance and creep resistance are good, and the welding performance is also very good.
α titanium alloy cannot be quenched and strengthened, mainly relying on solid solution strengthening, heat treatment is only annealed (stress relief annealing after deformation or recrystallization annealing to eliminate work hardening).
The typical grade is TA7, the composition is Ti-5Al-2.5Sn. Its operating temperature does not exceed 500 °C, and is mainly used to manufacture fuel tanks for missiles, turbine casings for supersonic aircraft, etc.

Titanium is a new type of metal. The performance of titanium is related to the impurities such as carbon, hydrogen and oxygen. The purest titanium iodide contains no more than 0.1% impurities, but its strength is low and its plasticity is high. The properties of 99.5% industrial pure titanium are: density P=4.5g/cm3, melting point 1800°C, thermal conductivity λ=15.24W/(M.K), tensile strength σ b=539MPa, elongation: δ=25% , Reduction of area ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.Titanium is a new type of metal. The performance of titanium is related to the impurities such as carbon, hydrogen and oxygen. The purest titanium iodide contains no more than 0.1% impurities, but its strength is low and its plasticity is high. The properties of 99.5% industrial pure titanium are: density P=4.5g/cm3, melting point 1800°C, thermal conductivity λ=15.24W/(M.K), tensile strength σ b=539MPa, elongation: δ=25% , Reduction of area ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.

DESCRIPTION:

Advantage:

We have more than ten years of experience in building titanium’s factory,which includes almost one thousand employees.our factory located in baoji,titanium valley.we strictly control every process of production and strive to provide customers with high quality products,And our products sale to all over the world.