Auto Making 1d 1.5d 160t Elbow Cold Forming Machine
200T pipe elbow machine
The series cold bending machine is mainly used for carbon steel, stainless steel 1D, 1.5D elbow cold push molding, push mode has the steel ball and core rod pushing in two ways. Core rod forming push system equipped with a semi-automatic mechanical demolding device.
The host comprises a body(frame),die-closing cylinder ,side pushing cylinder, demolding device. A control mechanism is composed of power station,limiting device ,pipeline and electrical control box, operation box.
The forming principle:pipe blank ,in the tunnel cavity by external locking,is pushed by hydraulic top rod from the guide section into forming cavity equiped inner core bending. then demold by demolding device.the whole process is control by PLC.
Standard export packing,woodbox loaded,airframe coverd with one layer transparent plastic film.
| Pressure of main cylinder:160T | Pressure of side cylinder:100T |
| daylight:800mm | tablesize:700mm×650mm |
| Motor power:11KW | Forming ability:≤φ114×6 |
| Pressure of main cylinder:500T | Pressure of side cylinder:300T |
| daylight:1400mm | Table size:1600mm×1000mm |
| Motor power:30KW | Forming ability:≤φ273×10 |
| Pressure of main cylinder:200T | Pressure of side cylinder :150T |
| daylight:1000mm | tablesize:1000mm×700mm |
| Motor power :15KW | Forming ability :≤φ168×6 |
| Pressure of main cylinder:800T | Pressure of side cylinder :450T |
| daylight :2200mm | Table size :2500mm×1600mm |
| Motor powe:55KW | Forming ability :≤φ426×12 |
| Pressure of main cylinder :1200T | Pressure of side cylinder :600T |
| daylight :2400mm | Table size :3000mm×2000mm |
| Motor powe:74KW | Forming ability :≤φ530×12 |
Contact:
Darcy Dong
Email address: guozhong_darcy@pipefittingsmachine.com
Whatsapp/ Wechat: 008625630731167
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.