Metal Roof Panel Light Steel Keel Roll Forming Machine
new metal roof panel light steel keel cd ud stud track profile roll forming machine
1. Usage And Introduction Of This Production Line
This type of forming machine line includes various kinds of roof panel forming machines, wall panel forming machines, and lining plate forming machines , C Z purlin roll forming machines, guard rail roll forming machines, metal deck roll forming machines, guide rail roll forming machines etc. It has received 3 patents of utility model and is widely used in steel construction enclosure. We can provide roll forming equipment in various profile shapes and configurations to satisfy your specific requirements.
| uncoiler | 1set |
| coil sheet guiding device | 1set |
| main roll forming system | 1set |
| punching device | 1set |
| cutting device | 1set |
| Hydraulic station | 1set |
| PLC control system | 1set |
| support table | 1set |
2. The roll forming machine parameters
| Feeding material | PPGI / GI plate |
| Frame type | steel board welded |
| Width of the plate | 1250mm |
| Thickness of the plate | 0.3 - 0.8mm |
| Dimensions | 7000mm*1500mm*1400mm |
| Diameter of the shaft | Φ75mm |
| Roller station | 18rows , 20rows |
| Productivity | 2 - 3m/min, 8 - 12m/min |
| Drive mode | A / C motor |
| Motor power to drive the machine | 5.5 + 4 kw |
| All nut and bolt | 8.8 grade |
| Voltage | 380V 50Hz 3phase or as per requirement |
| Weight | 7600kgs |
| Material of the cutting head | Gr12 , heat treatment HRC58-60 |
| Machine frame | 350 H steel |
| Side board thickness | 16mm |
1. Low cost, light weight but high strength, short building period, and re-cycle use
2. Save material , no waste.
3. Easy operation, low maintenance cost
4. Infinite sizing(any size within machine range),help to save material
5. Optional Punch hole at any position of purlin web side and flange side
Some relative terms we can provide:
1) Roll former has leveling bolts in the base for adjust the leveling
2) Machine base frame adopt H beam welding steel
3) In the main roll forming machine have 2 buttons for urgency stop if happen any malfunction.
4) Machine adopt new station to make machine more strong
5) To avoid accidents,all of drive part adopt protect cover
6) Color of machine: Blue and yellow (or base on customer request)
4. FAQ (about our roll forming machine)
4.1:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
4.2:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,
if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.
if after warranty period,we can through negotiation for to solve the problems,and we supply the technical support for the whole life of the equipment.
4.3:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.
5. Roll forming machine pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.