30m3 per hour Electric Power Concrete Mixer Pump JBS30 with 100m free pipe

Concrete pump is a kind of composite pumping requirements of concrete pump, through the horizontal or vertical installation of pipelines, the scene of the continuous conveying to the pouring fine stone concrete conveying equipment, widely used in the second post filling, floor heating engineering, roofing, wall of high-rise building, reservoir and hydropower station, port, wharf, basic processing soft foundation reinforcement grouting subway tunnel backfill grouting bolt support in mine construction.

Main features of diesel concrete pump JBS30:

1. Compared with domestic products, the electrical control system is the simplest, with the least number of components and the highest reliability.

2. The mixer has a unique shape that separates the hydraulic motor from the bearing base of the mixer. At the same time, a large-capacity motor is used to provide a sufficiently large mixer torque.

3. The hydraulic circuit accepts high oil into the double distributor, and then the lubrication section can receive hydraulic oil. This provides lubrication to the piston and other parts of the concrete cylinder and extends the life of the piston and other seals.

Parameters of diesel concrete pump:

Mechanical system

Design of hopper and S-valve, etc. I-DEAS software was used for calculations. The hopper and S-valve have good stiffness to avoid hopper deformation and S-valve fracture.
The mixer has a unique shape that separates the hydraulic motor from the bearing base of the mixer. Also, using a motor with a large working volume ensures that the torque of the mixer is large enough.
To ensure good conveying progress and reduce the phenomenon of pipe blockage, it is necessary to use a wear plate and a less abrasive cutting ring. Longley wear plates and cutting rings are made of materials with a high wear rate, which greatly extends the service life of the components.