Q235 Material JS 1500 Twin Shaft Concrete Mixer Used For Engineering Construction

Introduction:

The concrete mixer is twin axis compulsory concrete mixing machine, which has two mixing shafts inside the mixing drum. When the mixer is working ,both the two shafts are running. it can work independently, also can be composed in the concrete batching plant.

JS series concrete mixer are double horizontal axle forced mixers has a high degree of automation, mixing of good quality, high efficiency, low energy consumption, the noise is small, simple operation, convenient maintenance, wearing parts advantages of long life.Widely used in plastic, dry, rigid, light weight aggregate concrete and various kinds of mortar, etc. Can be used alone, also as mixing station supporting the host, is suitable for various kinds of construction site and precast plant.

Parameters:

Advantages of JS series

1. The mixer enjoys the patent of double-layer sealing at the shaft end, which can avoid the leakage of internal materials during the operation of the mixer and prevent the dust from entering

2. The mixer shall be sprayed with primer, antirust paint and finish paint in three layers to prevent moisture and rust, so as to prolong the service life of the machine.

3. Before painting, the mixer will use sand blasting machine to remove oil, rust and dust to ensure better painting effect.

4. The underframe of mixer is supported by anti-skid base plate, which is convenient for workers to maintain and safe.

5. The double horizontal axis of the mixer uses the boring machine technology to ensure that the two shafts are on the same horizontal plane, and the two shaft ends of the same shaft are on the same concentric circle, so as to avoid the collision of the mixing arm during operation, so as to extend the service life of the machine.

6. The inner wall of the mixer barrel is inlaid with a lining plate with high strength and resistance alloy. The lining plate is made by Changli, which is detachable and easy to install a new lining plate. High strength alloy has the characteristics of high hardness and wear resistance, so the inner wall of mixer is more durable. At the same time, the mixing blades of the mixer are also made of high-strength alloy materials, which can bear hard aggregate and make the blades more durable.

7. Adopt carbon dioxide protection welding to reduce the deformation of welding parts