Introduction

FTTH Box Our terminal box is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected.

Feature
- Easy installation

- Easy slick-in cover mounting
- Hinged and detachable splice cassette.

- Suitable for many type of modules installation,widely used in the area of cable wiring sub-system.

- Embedded box ,installation and removal easily with a protective door,proof dust.
- Any logo can be printed on the box according to customer requirements

- Manage fibers in a reasonable fiber radius condition.

- Suitable for the fusion splice or mechanical splice

- Efficient cable management

Application:

FTTH, FTTB, FTTC

Telecommunication Network

Local Area Network

Installation:Wall hanging:
1 According to the backplane mounting hole’s distance, hit 4 mounting holes on the wall, and knock the plastic expansion sleeve.
2 Fixed the box on the wall with M8 * 40 screws.
3 Position the upper end of the box into the wall hole, and then use M8 * 40 screws fix the box on the wall.
4 Check the box installation, close the door after qualified. In order to prevent rainwater from entering the box, the box should be tightened by a key column.
5 Insert the outdoor optical cable and butterfly type optic cable according to the construction requirements.

Specification

1). Environmental Requirement

Working temperature:-40℃~+85℃

Relative humidity:≤85%(+30℃)

Atmospheric pressure:70KPa~106Kpa

2). Main Technical Data

Insertion loss:≤0.2dB

UPC return loss:≥50dB

APC return loss:≥60dB

Life of insertion and extraction:>1000 times

3). Thunder-proof Technical Data

The grounding device is isolated with the cabinet, isolation resistance is no less than2000MΩ/500V(DC);IR≥2000MΩ/500V

The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover; U≥3000V