1/16" Petroleum Additives Molecular Sieve 5A Strips

1/16" Petroleum Additives Molecular Sieve 5A Strips

Product introduction

The 5A molecular sieve can adsorb any molecule smaller than the pore size,commonly referred to as a calcium molecular sieve. It can adsorb C3-C4 normal alkanes, chloroethane, bromoethane, butanol, etc. in addition to the functions of 3a and 4a molecular sieves, and can be applied to the separation of normal isomeric hydrocarbons, pressure swing adsorption separation, and co-adsorption of water and carbon dioxide.
Molecular formula: 0.70CaO·0.30Na2O·Al2O3·2.0SiO2·4.5H2O

5A Molecular Sieves Application

» Purification of brazing atmospheres and generation of protective atmosphere in metallurgy;

» Separation of mixtures of Olefin and Paraffin Hydrocarbons;

» Gas purification of rubbish recycling plants from toxic agents;

» Natural and oil gas purification from Sulphurous compounds, Carbon Dioxide and Mercaptans;

» Extraction and purification of normal Paraffins which are feed for manufacturing detergents and

 
5A molecular sieve technical Index:

 
Store
Storage: Room temperature, relative humidity not more than 90%; not directly exposed to the air; avoid water, acid and alkali.
Packing: cardboard drum or carton packaging.
Note: Avoid direct exposure of molecular sieve to air.
 
Product Pictures

 
 
Regeneration
1. Removal of water: it depends on the pressure, temperature and water content of the regeneration gas. Under normal circumstances, the dry gas at 200~350℃ will pass through the molecular sieve bed for 3~4 hours under the pressure of 0.3~0.5kg/cm to bring the outlet temperature to 110~180℃ and cool.
2. Removal of organic matter: replace organic matter with water vapor, and then remove water.
 
 
Package
Packed in iron drums, (according to the product model) net weight 125kg, 135kg, 140kg, or according to user needs.
 
Factory information
Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.