2.5mm Type 4a Molecular Sieve 8*12 Beads

2.5mm Type 4a Molecular Sieve 8*12 Beads

Product Description

Molecular Sieve type 4A (Angstrom) is an alkali alumino silicate, obtained through synthesis of type A zeolite in sodic form. it is the sodium form of the Type A crystal structure. 4A molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). Galaxychem type 4A molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger.

4A molecular sieve technical Index:

Application:

Deep drying of air, Natural gas, alkane and refrigerant. Generation and purification of argon. Static dehydration of electronic element, pharmaceutical and unstable materials. Desiccant for paint, dope and foul etc. Type 4A molecular sieve is typically used in regenerable drying systems to remove water vapor or contaminants which have a smaller critical diameter than four angstroms.

Basic performance

It has the structure and characteristics of a crystal, the surface is a solid skeleton, and the internal cavities can play the role of adsorbing molecules. There are pores connected to each other between the cavities, and molecules pass through the pores. Due to the clean nature of the pores, the pore size distribution of the molecular sieve is very uniform. Molecular sieves selectively adsorb molecules based on the size of the pores inside their crystals, that is, adsorb molecules of a certain size while repelling molecules of larger substances. Zeolite molecular sieves can be divided into three groups: small pores, mesopores (mesopores) and double pore zeolites according to their pore or channel system.

Structure diagram

The adsorption of zeolite molecular sieve has two characteristics:

(1) The Lewis center on the surface is very polar;

(2) The size of the cage or channel in the zeolite is small, which makes the gravitational field strong. Therefore, its adsorption capacity for adsorbate molecules far exceeds other types of adsorbents. Even if the partial pressure (or concentration) of the adsorbate is very low, the adsorption capacity is still considerable. The adsorption and separation effect of zeolite molecular sieve is not only related to the size and shape of adsorbate molecules, but also related to its polarity. Therefore, zeolite molecular sieves can also be used for the separation of substances of similar size.

Storage

Room temperature, relative humidity not greater than 90% indoors: avoid water, acid, alkali, isolate air, and store in airtight.

Regeneration

Removal of water: dry gas such as nitrogen, air, hydrogen, saturated hydrocarbon, etc. can be used to heat to 150-320℃ and pass into the molecular sieve bed under 0.3-0.5kg/m2 pressure for 3-4 hours, and then to the adsorber Pass in dry cold air for about 2-3 hours, isolate the air and cool to room temperature.

Removal of organic matter: the adsorbate can be replaced from the molecular sieve with water vapor, and then heated to (1). The regeneration can also be regenerated by superheated steam or inert gas at 200-350℃. Exposure to gases that produce explosive mixtures).

The degassed substances can be regenerated by the decompression removal method.

Package

Can be packaged according to user needs.

Product Pictures

Factory information

Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.