99% Purity 2μM Activated Powder Desiccant 4A

99% Purity 2μM Activated Powder Desiccant 4A

Product Description

Molecular Sieve Desiccant is developed by exploitation of natural montmorillonite ores and using suchtechniques as high temperature heating,organic carbonization, montmorillonite swelling , steaming treatment, dying activation , crushing and screening concertration.

Molecular sieve activation powder is widely used in the production of polyurethane and other polymers. It can absorb impurities such as moisture that affect product quality without changing the physical and chemical properties of the product itself. It can also be used as a selective adsorbent to be added to specific polymer or paint production processes to adsorb CO2, H2S and other gases produced during the production process. Some powdered molecular sieves can also be applied to hollow glass composite strips as desiccants or as catalyst carriers.

Common model

3A activated powder desiccant

4A activated powder desiccant

5A activated powder desiccant

13X activated powder desiccant

Technical Index Of Activated Alumina Desiccant

Typical Application:

(1) Used for insulating glass sealant strips and solvents.

(2) Used for dehydration of coating and polyurethane glue etc

(3) Used for dehydration of coating and solvents

(4) Used for dehydration in coating industry and paint industry

Packaging

 bags, drums or according to customer requirements.

Note

Molecular sieve activated powder is easy to absorb moisture and should not be exposed to the air directly. It should be placed in a dry place during storage.

Product Pictures

Factory information

Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.