1/16" 1.6mm 5A Molecular Sieve Dryer

 Water Treatment 1/16" 1.6mm 5A Molecular Sieve Dryer
Product introduction
 
5A molecular sieve pore size for 5A, can adsorption is less than the diameter of any molecule, is mainly used in heterogeneous hydrocarbon separation, pressure swing adsorption, adsorption separation and water and carbon dioxide, based on the industrial application characteristics of 5A molecular sieve, we in the production of 5A molecular sieve choose high adsorption, adsorption speed, especially suitable for the pressure swing adsorption, can adapt to all kinds of size of oxygen, hydrogen, carbon dioxide and other gases pressure swing adsorption device, is the high-quality goods in the industry pressure swing adsorption (PSA).
 
Regeneration of 5A Type Molecular Sieve
Molecular sieve Type 5A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 5A molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
 
Size
5A - Zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
 
Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
 
5A molecular sieve technical Index:

Index Item	Unit		Technical index
			5A-1 1/16"	PSA－H2
Size		1/16"			4×8 mesh
			(RK-29)	6×8 mesh
Diameter	mm	1.5-2.0	1.5-2.0	2.4-3.6	3.6-4.8
Size ratio up to grade	%	≥98	≥98	≥96	≥96
Bulk density	g/ml	≥0.72	≥0.72	≥0.75	≥0.68
wear rate	%	≤0.20	≤0.2	≤0.25	≤0.25
Crushing strength	N	≥35	≥35	≥40	≥100
Static water adsorption	%	≥21.5	≥21.5	≥21.5	≥21.5
C4H10 adsorption capacity				≥9.4	≥9.4
Carbon dioxide adsorption	%	≥15.6	≥15.6
Package water content	%	≤1.5	≤1.5	≤1.5	≤1.5

 
 
Scope of application

This kind of sieve absorbs substances at the molecular level. It can absorb up to 22% of its body weight. The adsorption principle is similar to that of chromatography, except that the molecular composition of the substance is not changed.
1. Natural gas drying, desulfurization, and carbon dioxide removal;
2. Separation of nitrogen and oxygen, separation of nitrogen and hydrogen to produce oxygen, nitrogen and hydrogen;
3. Petroleum dewaxing, separation of normal hydrocarbons from branched hydrocarbons and cyclic hydrocarbons.
 
Store
Storage: Room temperature, relative humidity not more than 90%; not directly exposed to the air; avoid water, acid and alkali.
Packing: cardboard drum or carton packaging.
Note: Avoid direct exposure of molecular sieve to air.
 
Product Pictures

 
 
Package
Packed in iron drums, (according to the product model) net weight 125kg, 135kg, 140kg, or according to user needs.
 
Factory information
Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.