CAS 1318-02-1 XH-7 Refrigerant Desiccant

CAS 1318-02-1 XH-7 Refrigerant Desiccant

Product Description

The service life of most refrigeration systems depends on when the refrigerant leaks. The leakage of refrigerants is caused by the corrosion of pipes by the harmful substances produced by the refrigerant and the trace moisture contained in it. The molecular sieve has the characteristics of low dew point control, high strength, low wear and does not damage the chemical stability of the refrigerant.

Characteristics of Activated alumina adsorbent:

High bulk density

Uniform size

High mechanical strength and wear resistance

As a model produced by long development production technology, XR101 activated alumina ball is a water adsorbent for compressed air for exclusive use. Especially, it has excellent wear resistance, therefore it causes little dust in compressed air.

High pore volume and high adsorption

With large surface area, XR101 activated alumina balls adsorb higher amount of water and fast desorption during regeneration. Its life is longer, and it has a remarkable capacity to regenerate.

Technical index:

Application of Activated alumina:activated alumina is used for deep drying of gas or liquid phase of petrochemicals, air separation adsorption and adsorption drying by automatic instruments.

Storage

The molecular sieve should be stored at room temperature, and the relative humidity is not more than 90% indoors: avoid water, acid, alkali, isolate the air, and store in airtight

Packaging

It can be packaged according to the needs of customers.

Product Pictures

Factory information

Shanghai Xuefeng Molecular Sieve Co., Ltd. adopts the most advanced and fully automated assembly line molecular sieve production technology in China, and has positions for dosing, kneading, extrusion, drying, roasting and packaging. The main equipment includes pelletizing machine, hardening cylinder, kneader, extruder, belt dryer, rotary roasting furnace, vibrating screen, scale and other ancillary facilities. The production process parameters are all automatically controlled, and there is no paper recorder attached. , The results of the process parameters are comprehensively recorded, and at the same time, the operators of each position shall manually record the parameters every hour to ensure the traceability of the operation process. At the same time, the company pays attention to the inspection of intermediate products, and has set up sampling points for intermediate products in the ingredients, extrusion molding, and drying positions to ensure that the intermediate products meet the specified quality requirements.