ABS Submersible Fish Tank Heater Over Temperature Protection For Saltwater Freshwater
Submersible Fish Tank Heater with Over-Temperature Protection for Saltwater Freshwater
About This Item
1. Precise Temperature Control: An intelligent IC chip controls the heater’s temperature, keeping the temperature difference within ±0.5℃/±1ºF; It provides living environment for your aquatic creatures
2. Aquarium Heater:and a plastic tube material that features explosion-proof and anti-corrosion engineering, which makes this submersible heater more resistant to damage while heating better than traditional glass heaters; Built with overheat and water shortage protection
3. External Temperature Controller: The touch-button controller adjusts the temperature without getting your hands wet; It’s easy to control the temp from 68℉/20°C to 94℉/34°C; Check the size chart to find your desired fish tank heater
4. Easy to Setup: The 500W submersible heater is suitable for 39 to 125 gallons aquariums; Install it vertically or horizontally and ensure the device is fully submerged under the water
How to set temperature
1. Place the heater rod inside the aquarium and keep fully submerged.
2. Plug in power and you can see the red light indicator on and LED digital number display current water temperature.
3. You can press and hold the button on the controller for 2-3 seconds to switch between Fahrenheit and Celsius. Temperature control range: 63-94℉/17℃-34℃.
4. You need to press the button on the controller again and again to adjust the temperature until the screen displaying the temp you desired.
5. The heater begins to heat.
Product Parameters
| Compatible Devices | fish tank , aquarium tank , small pond |
| Controller Type | Push Button |
| Material | Polyresin |
| Size | 50W(2-8 gallons) |
| Special Features | Heating , Underwater , Adjustable |
| Specific Uses For Product | Adjustable temperature , built-in thermometer , constant the water temperature , dual LED display , small size, easy to hide in mini tank |
| Tank Volume | 8.00 gallons |
Warm Tips
1. Always keep heater rod and probe fully submersible.
2. Before take out the heater, please disconnect power and wait for 30 minutes to cooling down.
3. This heater is not for suitable for use in acrylic tank.
4. Do not bury it undergravel as gravel not conduct heat.
5. Keep the heating rod out of the reach of children.
6. The inside of the product is composed of glass and quartz sand. If the glass is broken and the quartz sand leaks due to long-term use or damage in the transportation diagram, turn off the power first. Please be assured that the substance will not cause any harm to aquatic organisms, and we will send you a new product!
Widely Use
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.