Full hydraulic Motor steering gear Grader Hydraulic Gear Pump   NPC

What parameter you need to send us :

If you need the gear pump , please send us the pump picture and machine model , so we can check it easily .
If you need the hydraulic pump parts , you can send us the size of the piston shoe , so we can check the parts according to the piston shoe size , but it will be better if you send me the nameplate of the pump and pump picture .

Product Description:

Note : 1. When the pressure of the pump exceeds 16 MPa and the displacement is "4"6"8", the speed shall be greater than 145 or /min.

          2. Reduce the negative pressure of the inlet when the single pump or double pump has a large displacement at high speed.

          3 .Limit the maximum speed to 12oor/min when using synthetic hydraulic fluids and water containing hydraulic fluids.

          4 .It is recommended to run at a speed of 1ooor/min with strict requirements for low noise. 5. Noise can be obtained under working                              conditions of 14 MPa and 12oor/min. Input power at 16 MPa and 1500r / min available under working conditions .

Instruction Manual of Installationand Operation for Gear Pump

In developed industry market, the spare parts of gear pump achieved sophistied . Therefore , check of clean oil with operation before using pump. The installation should be according to the ex-works technical documents of gear pump , and related specifiion of this manual , also the pump structure should be taken into consideration .