OKADA316 Hydraulic Hammer Breaker Moil Point Chisel For OKADA 316 Rock Tool Chisels Excavator Parts
OKADA316 Hydraulic Hammer Breaker Moil Point Chisel For OKADA 316 Rock Tool Chisels Excavator Parts
| Part name | Hydraulic Breaker Chisel |
| Hardnes | HRC48-52 |
| Raw Material | 42CrMo |
| Length | 400-1800mm |
| Type | Moil, Blunt, H-wedge, V-wedge,Conical point |
We can produce more than 1200 types of chisels for most world famous hydraulic breakers,tool diameter vary from 40mm to 210mm. the following are part of the chisel tool models that we can supply for our customers:
| Atla | MB500,MB700,MB800,MB1000,MB1200,MB1500,MB1600,MB1700,HB2000,HB2200,HB3000,HB3100,HB4100, |
| Hydraulic breaker | HB4200,HB5800,HB7000,PB110,PB160,PB210,PB310,PB420,SB50,SB52,SB100,SB100MK2,SB102,SB110,SB150, |
| SB150MK2,SB152,SB200,SB202,SB300,SB302,SB450,SB552,SBC60,SBC115,SBC255,SBC410,SBC610,SB650, | |
| SBC800,SBC850,TEX30H,TEX75H,TEX80H,TEX100H,TEX110H,TEX180H,TEX250H,TEX400,TEX600-900H, | |
| TEX1400H,TEX1800,TEX2000,TEX1800H,TEX2000H,HBC1100-1700,HBC2500,HBC4000,HBC6000 | |
| Rammer | S18,S21,S22,S23,S23N,S24,S25N,S25,S26,S27,S29,S52,S54,S55,S56,S82,S83,S84,S86,E63, E64, E,65, |
| NPK Hydraulic breaker | E12-X, E15-X, E18-X, E24-X,E102, E106, E200, E201,E 202, E203, E204, E205, E206, E207, E208A,E 210, |
| E210B, E212, E213, E213A, E215, E216, E220, E225,E240A,GH06, GH07, GH1, GH2, GH3, GH4,GH5, | |
| GH6, GH10, GH12,GH15, GH18,H06-X, H08-XA, H1-XA, H2-XA/XE,H 2-X, H3-XA/XE, H4-X/XE, H5-X, | |
| H6-X, H7-X,H 8-X,H8-XA, H10-X, H10-XB, H10-XE, NPK H11X,H12-X, H12-XE,H14X | |
| Furukawa Hydraulic breaker | F1, F2, F3, F4, F5, F6, F9, F12, F19, F20,F22, F27, F 30,F35, F45, F70,F100,HB05R,HB1G,HB2G,HB2,5G, |
| HB3R,HB3G,HB5G,HB8G,HB10G, HB15G,HB20G,HB30G,HB40G, HB50G ,HB100G, HB100, HB200,HB400, | |
| HB700,HB1100,HB1200,HB1500,HB1800,HB2000. | |
| Kent | KF1,KF2,KF3,KF4,KF5,KF6,KF9,KF12,KF19,KF22,KF27,KF35,K45,KF70,KHB1G,KHB20,KHB2GII,KHB30, |
| KHB3GII,KHB50,KHB5GII,KHB80,KHB8GII,KHB100,KHB10GII,KHB10GII-HD,KHB150,KHB15GII,KHB200, | |
| KHB20GII,KHB300,KHB30GII,KHB400,KHB40GII,KHB500,KHB50G | |
| Soosan | SB10,SB20,SB30,SB35,SB40,SB43,SB45,SB50,SB60,SB81,SB100,SB121,SB130,SB140,SB151 |
| HM45,HM55(50),HM51,HM60V,HM75(60),HM61,HM85,HM90V,HM100,HM110,HM130,HM131,HM135,HM140V, | |
| HM170,HM185,HM190V,HM200,HM220,HM230,HM301,HM305(300),HM400,HM401,HM405,HM350V,HM551, | |
| HM555,HM560,HM560CS(550),HM560V,HM580,HM600,HM601,HM680,HM720CS,HM(710),HM711,HM715, | |
| HM720,HM720V,HM712,HM700,HM701,HM702,HM705,HM706,HM780V,HM800,HM900,HM901,HM902, | |
| HM960CS(950),HM960V,HM1000V,HM1200,HM1201,HM1205,HM1500,HM1500CS,HM1500V,HM2100,HM2300V, | |
| HM2500(2200),HM2500V,HM2600 | |
| Montabert | BRP30, BRP45, BRP50, BRP60, BRP70, BRP85, BRP95, BRP100, BRP130, BRP140, BRP150 ,BRH40, BRH75, |
| BRH76, BRH90, BRH91, BRH125, BRH250, BRH270, BRH501, BRH570, BRH620, BRH 625, BR 750,BRV32,M30, | |
| M50, M60, M70, M85, M95, M125SX, M130, M140, M150, M300, M600, M700, M 900,SC6, SC8, SC12, SC16, SC22, | |
| SC28, SC36,V32, V1200,V43,V45,V52,V53,V55,V2500,V3500,V4500 | |
| Indeco | HB5,HB8,HB12,HB19,HB27,HP200,HP350,HP500,HP600,HP700,HP900,HP1200,MES121,MES150, |
| MES180,MES181,MES200,MES250,MES300,MES301,MES350,MES351,MES450,MES451,MES521,MES550, | |
| MES553,MES601,ME621,MES,650,MES1050,MES1200,MES1500,MES1800,MES1750,MES2000,MES2500, | |
| MES3000,MES3500,MES5000,MES7000,ME8500,UP181,UP200,U301,UP350,UP351,UP462,UP521,UP550, | |
| UP553,UP601,UP621,UP650,UP1200 | |
| Stanley | MB105,MB125,MB156,MB250,MB350,MB506,MB550,MB656,MB800,MB15EX,MB20 EX,MB30EX,MB40EX, |
| MB50EX,MB70EX,MB80EX,MB100EX |
Routine maintenance methods for hydraulic breaker chisel rods include
1.Cleaning: Thoroughly clean the chisel rod after each use to remove dirt, dust, and debris. Use a brush or compressed air to clean hard-to-reach areas.
2.Inspection: Regularly inspect the chisel rod for signs of wear, such as cracks, chips, or bending. Pay attention to the condition of the working end and the shaft.
3.Greasing: Apply a suitable grease to the chisel rod according to manufacturer recommendations. Greasing helps lubriCATEEEEEEe the rod and prevents excessive wear during operation.
4.Alignment: Ensure proper alignment of the chisel rod with the hydraulic breaker. Misalignment can lead to premature wear and reduced performance.
5.Storage: Store the chisel rod in a clean, dry, and protected environment to prevent corrosion and damage. Use storage racks or cxs designed for hydraulic breaker tools.
6.Handling: Handle the chisel rod carefully to avoid impacts and drops that could cause damage. Use proper lifting equipment when moving the rod.
7.Usage: Operate the hydraulic breaker within its recommended specifiCATEEEEEEions to avoid overloading the chisel rod. Avoid using the tool on materials that could cause excessive wear.
8.Replacement: Replace the chisel rod if significant wear or damage is detected during inspections. Using a worn or damaged rod can lead to equipment failure or safety hazards.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.