Rigid Box Type Mineral Area Usage Single Girder Gantry Crane Span Up To 30M

Product presentation of Single girder gantry crane

Single gantry cranes are a cost-effective alternative wherever the installation of bridgecranes is impractical due to a need for a raised runway structure. They are also an ideal supplement to bridge cranes at the workstation level. It can lower the investment on structure and space.
-High operational value
-Cranes to meet specific customer needs
-Single-girder gantry cranes with load capacities up to 32tons
-Indoor or outdoor operation
-Controlled by pendant traveling station or optional radio controls
-Modular design
We designed single girder Gantry cranes with different capacities and spans that will meet your requirements.

Technical parameters of Single girder gantry crane:

Box Type Single Girder Gantry Crane Drawing

Detailed Configuration of single girder hoist gantry crane:

1- Lifting Mechanism:

-Monorail wire rope hoist or chain hoist or manual hoist as option:

-lifting speed: single or dual as per required

-Trolley Speed: Single or Dual or Step less as per required

-High performance with most economical price

2-Driven Bogie and Bottom Beam:

-Forged Flanged wheel

-Rigid welded box type beam

-Compact layout

3-Griders and Legs:

-Main girder and 4 legs are welded box type or truss girders as option.

-Material: carbon steel with high quality of Q235B or Q345B

-The main girder is connected by strength bolt.

-Weld joint tested by X ray or ultrasonic examination;

-Modula design

-Designed Deflection≤1/800 of span

4-Control:

-Cabin control

-Independent pendent control as option

-Wireless control as option

5-Electric Part:

-Conductor power supply

-All hoist and crane movements are independent and can be run simultaneously.

-Protection degree IP55

-The components are positioned in a maintenance friendly way, and the whole layout provides with good protection

-Festoon cables are suspended on cable saddles, fixed to cable trolleys, running in a galvanized C-track.

6-Painting:

-Corrosion protection through rust removal by mechanical shot blasting SA 2.5

-First layer of coating epoxy 30 microns

-Second layer of coating epoxy 30 microns

-Third Layer of coating of polyurethane 40 microns

-Average thickness: about 100 microns

-Color: yellow or Orange as per requirements

Packing and shipping