Gr2 Gr5 Gr9 Titanium Round Rod 6mm 45mm
Gr2 Gr5 Gr9 Titanium Round Rod 6mm 45mm
This titanium round rod is supplied in Gr2, Gr5 and Gr9 for chemical industry use, in outside diameters from 6 mm up to 45 mm and cut lengths of 1000 mm or 3000 mm. Stock diameters of 3, 6, 8, 10, 20 and 30 mm are held for fast delivery. The bar is produced to ASTM B348, ASTM F67, ASTM F136 and AMS 4928 in cold rolled, hot rolled or annealed condition, with a bright, polished or pickled surface. The polished finish is free from cracks and pitting and both ends are flattened to keep the length tolerance.
Technical Specifications
| Standard | ASTM B348, ASTM F67, ASTM F136, AMS 4928 |
| Material grade | Gr1, Gr2, Gr5, Gr9, Gr23 (Gr5 ELI) |
| Diameter | 3 mm - 350 mm |
| Stock Diameter | 3, 6, 8, 10, 20, 30 mm |
| Length | 1000 mm - 6000 mm, or cut to length |
| Product Status | Cold rolled (Y), hot rolled (R), annealed (M) |
| Shape | Round bar, square bar, hex bar |
| Surface | Bright, polished, pickling |
Physical Properties
| Grade | Tensile Strength min ksi [MPa] | Yield Strength min ksi [MPa] | Elongation % |
|---|---|---|---|
| 1 | 35 [240] | 20 [138] | 24 |
| 2 | 50 [345] | 40 [275] | 20 |
| 3 | 65 [450] | 55 [380] | 18 |
| 4 | 80 [550] | 70 [483] | 15 |
| 5 | 130 [895] | 120 [828] | 10 |
| 7 | 50 [345] | 40 [275] | 20 |
| 9 | 90 [620] | 70 [483] | 15 |
| 12 | 70 [483] | 50 [345] | 18 |
| 23 | 120 [828] | 110 [759] | 10 |
Diameter Tolerance
| Diameter (mm) | h7 | h8 | h9 | h10 | h11 | h12 |
|---|---|---|---|---|---|---|
| 3 - 6 | 12 | 18 | 30 | 48 | 75 | 120 |
| 6 - 10 | 15 | 22 | 36 | 58 | 90 | 150 |
| 10 - 18 | 18 | 27 | 43 | 70 | 110 | 180 |
Tolerance values are in micrometres (um); "h" is a minus-only range (-x, +0).
Applications & Titanium Advantages
Titanium round rod is used for chemical industry equipment, medical components, machined parts and general corrosion-resistant fittings. Titanium is light, strong, non-magnetic and highly corrosion resistant, with a good strength-to-weight ratio, so parts keep their accuracy and last longer in demanding service. The production route runs from titanium sponge and master alloys through melting, forging, precision forging and machining to finished bars.
Quality, Customization & Inquiry
LHTi produces this titanium rod under ISO 9001:2015, TUV, SGS and BV quality control, with third-party inspection reports and material certificates available. Each batch is checked for surface quality, chemical composition and mechanical properties before delivery. Custom diameters and lengths are offered, packed in a plywood box with soft foam. Please send your drawing or specification for a quotation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.