Aging Resistant Gloss Polycarbonate Plastic Sheets

PC6811DB

Characteristic

• Light transmittance: The light transmittance of PC plate can be up to 89%, which can be beautiful with glass. The UV-coated board will not yellow when exposed to sunlight, fogging, and poor light transmission. After ten years, the light transmission loss is only 6%, the PVC loss rate is as high as 15%-20%, and the glass fiber is 12 %-20%.
• Impact resistance: The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plates of the same thickness, and 2-20 times that of tempered glass. There is no crack when falling with a two-meter hammer below 3kg. "Glass" and "Xianggang".
• Flexibility: According to the design drawing, it can be installed in the form of arch, semi-circular roof and window by cold bending method on the construction site. The minimum bending radius is 175 times of the thickness of the board, and it can also be hot-bent.
• Sound insulation: The sound insulation effect of PC board is obvious, which has better acoustic insulation than glass and acrylic board of the same thickness. Under the same thickness, the sound insulation of PC board is increased by 3-4DB compared to glass. It is the material of choice for highway noise barriers internationally.
• Energy saving: keep cool in summer and keep warm in winter, PC board has lower thermal conductivity (K value) than ordinary glass and other plastics, heat insulation effect is 7%-25% higher than equivalent glass, the insulation of PC board The heat is up to 49%. Therefore, the heat loss is greatly reduced, and it is an environmentally friendly material for buildings with heating equipment.

Precautions

1. It is forbidden to contact with the surface of fresh cement, acid and alkaline substances.

2. It is forbidden to contact with organic solvents such as benzene, gasoline, carbon tetrachloride, Tianna water, turpentine, or glues or paints containing such components

Description

PC board is also called polycarbonate board, Kapron board. Weak acid resistance, which is made of polycarbonate as the main component and adopts co-extrusion technology CO-EXTRUSION, shows that the PC board is resistant to neutral oil, strong acid, durable, and alkali-resistant. It needs to be coated with UV. But the high temperature resistance and good lighting effect PC sunshine board (also known as polycarbonate hollow board, glass capron board, PC hollow board) is processed with high-performance engineering plastic ---- polycarbonate (PC) resin It has the characteristics of high transparency, light weight, impact resistance, sound insulation, heat insulation, flame retardance, and aging resistance. It is a high-tech, extremely comprehensive performance, energy-saving and environmentally friendly plastic sheet, and is a widely used plastic building in the world Materials, there are advantages that other building decoration materials (such as glass, plexiglass, etc.) can not match.

Typical Property Values

Note: The above figures are typical values obtained under standard methods and should not be construed as unsteady application conditions.

Application

Wide used in such as:the hat,sunglass,windows,aviation sheet,lighting,electroplating,vacuum forming,dyeing,etc.